Abstract:Nylon composite materials with excellent characteristics of low filled, great thermal conductivity and mechanical properties were prepared by extrusion granulation. Continuous aluminum fibers was thermally conductive filler, and nylon 6 (PA6) was matrix. The effects of aluminum fiber mass fraction, diameter, length, and alumina (Al2O3) powder compound, surface treatment and other factors on thermal conductivity were studied. And microstructure was analyzed. The results show that the higher the mass fraction of aluminum fiber, the longer length of aluminum fiber, the better the thermal conductivity of composite materials; when the mass fraction of alumina fiber is less than 4%, the modification effect is 8 μm>12 μm>16 μm; when the mass fraction of alumina fiber is more than 4%, the modification effect is 16 μm>12 μm>8 μm; alumina and aluminum fibers cannot play a synergistic effect, but lead to thermal degradation; aluminum fiber surface treated with γ-glycidoxypropyl trimethoxysilane (KH560) can improve the thermal conductivity of the materials. When aluminum fiber mass fraction is 10% and the length is 10 mm, surface treated with KH560, the thermal conductivity of composite can rise up to 1.85 W/(m·K).