聚乙烯/聚乙烯醇-凹土渗透气化复合膜的制备与表征
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(21406082, 21476094); 江苏省高等学校大学生创新创业训练计划(201410323006Z); 江苏省科技支撑计划(工业)(BE2013080)


Preparation and Characterization of Polyethylene/Polyvinylalcohol-Attapulgite Pervaporation Composite Membranes
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以聚乙烯中空纤维微滤膜为底膜,聚乙烯醇(PVA)和凹凸棒黏土(ATP)为制膜液,采用溶液涂敷法制备了不同ATP含量的聚乙烯/聚乙烯醇-凹凸棒粘土渗透气化复合膜。对复合膜的物理化学结构进行了表征,并测试了复合膜的力学性能、耐水和透水性能。结果表明,PVA与ATP两者通过氢键作用,提高了复合膜的力学性能和耐水性能,当ATP悬浮液含量为5%时,复合膜的性能较好;同时,ATP的掺入会使复合膜的透水率降低,但远小于交联剂丁二酸的影响。

    Abstract:

    Polyethylene hollow fiber microfiltration membranes were selected as supported layer, polyvinylalcohol and attapulgite were selected as raw materials to prepare pervaporation composite membranes via solution coating method. The physical and chemical structures of the composite membranes were characterized. The mechanical, water resistance and permeability properties of the composite membranes were tested. The results reveal that PVA and ATP are chemically bonded in the form of hydrogen bonds. Then, the water resistance and mechanical properties of composite membranes are improved greatly. When the mass fraction of ATP suspension is 5%, the composite membranes exhibit better properties in this work. Meanwhile, the introduction of ATP would increase the water permeability of the composite membrane, but much lower than the effect of cross-linking agent (succinic acid).

    参考文献
    相似文献
    引证文献
引用本文

裴宇航, 李梅生, 赵宜江, 周守勇, 张盈, 时正秋.聚乙烯/聚乙烯醇-凹土渗透气化复合膜的制备与表征[J].高分子材料科学与工程,2016,32(4):163-167. Yuhang Pei, Meisheng Li, Yijiang Zhao, Shouyong Zhou, Ying Zhang, Zhengqiu Shi. Preparation and Characterization of Polyethylene/Polyvinylalcohol-Attapulgite Pervaporation Composite Membranes[J]. Polymer Materials Science & Engineering,2016,32(4):163-167.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2016-04-19
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司