聚丙烯珠粒发泡研究进展
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(31270610);湖北省科技支撑计划(2015BAA094)


Progress in Polypropylene Bead Foams
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    聚丙烯(PP)珠粒发泡材料具有优异的耐热、隔音、抗冲击以及耐化学腐蚀等性能,近年来被广泛应用在包装、建筑、汽车等行业。PP在其熔点温度附近的熔体强度会急剧下降,低熔体强度导致其难以得到好的泡孔结构,所以PP珠粒发泡的技术难度大,目前只有少数国家掌握了PP珠粒发泡的技术,因此PP珠粒发泡的研究受到了国内外的广泛关注。文中从制备工艺、发泡装备、性能改进、表征方法等方面综述了近年来国内外PP珠粒发泡的研究动态,并对该领域今后的研究方向进行了展望。

    Abstract:

    Polypropylene (PP) bead foam material has excellent properties such as heat resistance, sound insulation, impact resistance, chemical corrosion, etc. which has been widely used in packaging, construction, automotive and other industries in recent years. Due to the low melt strength of PP, it was very difficult to realize PP bead foaming with well forming properties, and this research attracts extensive attentions. At present, only a few countries have mastered PP bead foaming technology. This paper reviewed the recent research of the preparation, equipment, performance improvements and characterization for PP bead foam in detail. The research orientation of the field in the future was also suggested.

    参考文献
    相似文献
    引证文献
引用本文

胡圣飞, 陈哲, 范体国, 熊业志, 陈华.聚丙烯珠粒发泡研究进展[J].高分子材料科学与工程,2016,32(4):184-190. Shengfei Hu, Zhe Chen, Tiguo Fan, Yezhi Xiong, Hua Chen. Progress in Polypropylene Bead Foams[J]. Polymer Materials Science & Engineering,2016,32(4):184-190.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2016-04-19
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司