聚丙烯/弹性体共混体系流痕的形成机理及调控
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Formation Mechanism and Control of Flow Mark in Polypropylene/Elastomer Blends
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    利用扫描电子显微镜、衰减全反射傅里叶变换红外光谱仪和高温凝胶色谱仪研究了聚丙烯的相对分子质量及其分布、弹性体种类对聚丙烯/弹性体共混体系注塑样品流痕及流痕区结构形貌的影响。结果表明,弹性体的加入使聚丙烯缺口冲击韧性大幅提高,但聚丙烯和弹性体的微相相容性及熔体流动剪切诱导分相导致了注塑流痕的产生。茂金属催化丙烯基弹性体同聚丙烯具有更好的微相相容性;宽峰分布聚丙烯中低相对分子质量聚丙烯能提高共混体系的流动性,有利于橡胶相的解缠结和分散,能够稳定熔体的流动,避免基体与弹性体在剪切流动中发生相分离,从而有助于消除注塑流痕。

    Abstract:

    In this article, the effects of polypropylene (PP) molecular weight distribution and the kind of elastomer on formation mechanism and control of flow mark in PP/elastomer injection molding sample were revealed via scanning electron microscope (SEM), attenuated total reflection, Fourier transform infrared spectroscopy (ATR-FT-IR) and high temperature gel permeation chromatography (HT-GPC). The izod notched impact strength is greatly improved with the addition of the elastomer. Flow mark has two different constitutions due to the incompatibility and shear-induced phase separation in PP/elastomer blends. PP with broad molecular weight distribution and propylene-based elastomer could greatly reduce the flow marks,while retain excellent impact strength.

    参考文献
    相似文献
    引证文献
引用本文

傅轶, 刘冉, 彭志宏, 高翔, 刘琦, 陈洋, 邹华维.聚丙烯/弹性体共混体系流痕的形成机理及调控[J].高分子材料科学与工程,2016,32(5):49-53. Yi Fu, Ran Liu, Zhihong Peng, Xiang Gao, Qi Liu, Yang Chen, Huawei Zou. Formation Mechanism and Control of Flow Mark in Polypropylene/Elastomer Blends[J]. Polymer Materials Science & Engineering,2016,32(5):49-53.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2016-05-20
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司