硫化剂含量及填料类型对三元乙丙橡胶性能的影响
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

科技部863项目(SS2013AA051002)


Effect of Peroxide Content and Filler Type on the Properties of EPDM Rubber
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    为了获得综合性能更加优异的橡胶密封材料,文中分别研究了硫化剂含量及填料类型对三元乙丙橡胶交联密度、拉伸性能、硬度及压缩永久变形性能的影响。结果表明,未填充橡胶中硫化剂含量增多,体系交联密度增加,拉伸强度及断裂伸长率降低,硬度增加。较高的交联密度有利于降低压缩永久变形,但过度交联使材料性能下降。填充橡胶的交联密度、拉伸强度及硬度高于未填充橡胶。白炭黑填充体系的交联密度小于炭黑填充体系,但拉伸强度及硬度都大于炭黑填充体系。填充量一定时,炭黑填充体系的压缩永久变形小于白炭黑填充体系,疏水型气相法白炭黑填充体系的压缩永久变形小于普通气相法白炭黑填充体系。

    Abstract:

    The effect of peroxide content and filler type on the tensile properties, hardness, crosslinking density and compression set properties of ethylene-propylene- diene-terpolymer rubber (EPDM) vulcanizates was investigated. The reults show that the crosslinking density increases with the increasing peroxide content in unfilled EPDM vulcanizates. The increasing peroxide content in unfilled EPDM vulcanizates shows lower tensile strength, elongation at break and compression set, but higher hardness. EPDM vulcanizates filled with reinforcing filler have higher tensile strength, hardness and crosslinking density than that of unfilled EPDM vulcanizates due to the physical junctions between rubber and filler. Besides, the crosslinking density of carbon black filled sample is higher than that of silica filled sample. Carbon black N550 filled EPDM vulcanizates have lower compression set than silica filled EPDM vulcanizates and hydrophobic fumed silica filled EPDM vulcanizates have lower compression set than the common fumed silica filled EPDM vulcanizates.

    参考文献
    相似文献
    引证文献
引用本文

沈丽媛, 韩腾, 吴宏, 郭少云.硫化剂含量及填料类型对三元乙丙橡胶性能的影响[J].高分子材料科学与工程,2016,32(5):64-68. Liyuan Shen, Teng Han, Hong Wu, Shaoyun Guo. Effect of Peroxide Content and Filler Type on the Properties of EPDM Rubber[J]. Polymer Materials Science & Engineering,2016,32(5):64-68.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2016-05-20
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司