Abstract:A surface layer cellulose acetate (CA) flat film with numbers of porous structure was prepared by phase inversion processing. In this method, polyvinylpyrrolidone (PVP) was used as pore-forming agent, acetone and N, N-Dimethylacetamide (DMAc) were used as solvent. Pure water flux and dye rejection properties of the film were investigated. Meanwhile, the morphology of the film was characterized by field emission scanning electron microscopy. The effect of the content of the pore-forming agent on structure and property of CA flat film were also discussed. The results show that the CA concentration at 8%, amount of m(PVP)/m(CA)=23/100, and V(acetone)∶V(DMAc)=1∶1, a thin film surface with 200 nm thickness could be obtained. The pure water flux is up to 230.75 L/(m2·h) and the dye rejection rate remains above 97%.