超高分子薄膜双向拉伸的数值模拟
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Optimization Analysis for Biaxial Tension of Ultra-high Molecular Weight Polymer Films
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    针对一类超高分子聚合物薄膜材料(UHMWPE),通过单向拉伸实验获得了载荷-大变形曲线,并由弹塑性线性强化本构关系,拟合得到了相应的弹性模量、屈服应力、切线模量(硬化模量)等材料参数。将较大尺寸试件的有限元模拟结果和相应的实验结果进行对比,指出弹塑性线性强化本构关系可适用于UHMWPE薄膜大变形分析。应用弹塑性大变形有限元数值模拟了直线、抛物线、三次曲线、双圆弧等4种常见曲线导轨双向拉伸变幅区内的应力分布。为了减弱拐点处的应力集中,提出了圆弧-直线-圆弧的导轨曲线,计算分析表明,优化后的导轨曲线可以使变幅区薄膜的应力分布更加均匀,并且处于较低水平,达到了导轨优化的效果。

    Abstract:

    For a class of ultra-high molecular weight polymer films (UHMWPE) materials, the load-large deformation curve was obtained by the uniaxial tensile test. The mechanical parameters of the material, such as the elastic modulus, the yield stress, the tangent modulus, etc, were fitted by the elastic-plastic linear hardening constitutive relationship. The comparison between the finite element simulation for the specimen with larger size and the corresponding experimental results were implemented, which indicates that the elastic-plastic linear hardening constitutive relation can be applied to large deformation analysis of UHMWPE film. For the case of four common rail curves, including lines, parabola, cubic curve, double circle arc, etc, the stress distributions in luffing area with biaxial tension were numerically simulated by the elastic-plastic large deformation finite element. The rail curve in the form of circle-straight line-circle is proposed to suppress the stress concentration near the inflection point. The calculation and analysis show that the optimized rail curve can make the stress more uniform distribution and lower level, and the rail curve optimal effect is well.

    参考文献
    相似文献
    引证文献
引用本文

吴沛飞, 尚新春.超高分子薄膜双向拉伸的数值模拟[J].高分子材料科学与工程,2016,32(5):92-98. Peifei Wu, Xinchun Shang. Optimization Analysis for Biaxial Tension of Ultra-high Molecular Weight Polymer Films[J]. Polymer Materials Science & Engineering,2016,32(5):92-98.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2016-05-20
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司