膨胀石墨/石蜡/高密度聚乙烯导热复合定形相变材料传热行为的数值模拟
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金委员会-中国工程物理研究院联合基金资助项目(U1530102); 四川省教育厅重大培育项目(14CZ0011)


Numerical Simulation on Heat Transfer Behavior of Expanded Graphite/Paraffin/High Density Polyethylene Form-stable Phase Change Composite
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用FLUENT软件,对膨胀石墨(EG)/石蜡/高密度聚乙烯(HDPE)导热增强型复合定形相变材料(PCM)的熔化凝固过程进行数值模拟。结果表明,相变材料在熔化过程中的传热方式以自然对流为主,凝固过程以热传导为主,凝固过程长于熔化过程;EG能够提高熔化和凝固速率,并分别提高了545%,554%,弥补了石蜡热导率低的缺陷。为了验证模型的有效性,通过实验获得了石蜡/HDPE随时间变化的液相体积分数,模拟数据与实验结果基本吻合。

    Abstract:

    The solidification and melting process of the expanded graphite (EG)/paraffin/high density polyethylene (HDPE) form-stable phase change composite(PCM) were simulated by FLUENT. Results indicate that the heat transfer mode of PCM mainly is natural convection during the melting process and mainly is heat conduction during the solidification, and the solidification process is longer than the melting process. Compared with paraffin/HDPE, EG could accelerate the melting and solidification rates by 545%, 554%, respectively and remedy the defect of low thermal conductivity of PCM. The measurement of liquid fraction of paraffin/HDPE during the melting process was conducted to validate the proposed model. Simulated results are consistent with the experimental results.

    参考文献
    相似文献
    引证文献
引用本文

罗李娟, 张凯, 杨文彬, 范敬辉, 吴菊英.膨胀石墨/石蜡/高密度聚乙烯导热复合定形相变材料传热行为的数值模拟[J].高分子材料科学与工程,2016,32(5):99-104. Lijuan Luo, Kai Zhang, Wenbin Yang, Jinghui Fan, Juying Wu. Numerical Simulation on Heat Transfer Behavior of Expanded Graphite/Paraffin/High Density Polyethylene Form-stable Phase Change Composite[J]. Polymer Materials Science & Engineering,2016,32(5):99-104.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2016-05-20
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司