芯材制备条件对聚脲石蜡相变微胶囊性能的影响
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

大学自然科学基金资助项目(HGDQNJJ15001)


Effect of Core Preparation Conditions on the Performance of Paraffin Microcapsules in Polyurea
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用吐温-80(Tween-80)和司班-80(Span-80)复配乳化剂,通过芯材表面修饰法制备以聚脲为壁材,石蜡为芯材的石蜡相变微胶囊材料。采用差示扫描量热仪、激光粒径分布仪和扫面电子显微镜对石蜡相变微胶囊进行了形貌表征和性能分析。通过对石蜡相变微胶囊芯材制备的单因素试验,对聚脲石蜡相变微胶囊的性能进行了研究。实验结果表明,复配乳化剂的使用能使芯材乳液的稳定性增加,而复合乳化剂用量、搅拌速率和乳化时间的延长有利于芯材乳液的稳定性的增加;芯材制备过程中,搅拌分散转速、搅拌分散时间及搅拌降温速率对石蜡相变微胶囊的性能有重要影响。

    Abstract:

    Tween-80 and (Span-80) was mixed as compound emulsifier, the polyurea microencapsulated paraffin phase change materials which have polyurea as wall, paraffin wax as core material were prepared by core-surface modification method. The polyurea microencapsulated paraffin phase change materials prepared were characterized by differential scanning calorimetry (DSC), laser particle size distribution measurement and scanning electron microscopy (SEM). Through single factor experiment, the properties of polyurea microencapsulated paraffin phase change materials were studied. The results show that use of emulsifiers can increase the stability of core emulsion and increasing amount of emulsifier or increasing emulsifying time is in favor of increasing the stability of the core emulsion; during preparation of the core material, mixing and dispersing speed, mixing and dispersing time, stirring the cooling rate of paraffin microencapsulated phase change properties have major impact on properties of paraffin microcapsules.

    参考文献
    相似文献
    引证文献
引用本文

王轩, 朱金华, 王紫潇.芯材制备条件对聚脲石蜡相变微胶囊性能的影响[J].高分子材料科学与工程,2016,32(5):124-129. Xuan Wang, Jinhua Zhu, Zixiao Wang. Effect of Core Preparation Conditions on the Performance of Paraffin Microcapsules in Polyurea[J]. Polymer Materials Science & Engineering,2016,32(5):124-129.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2016-05-20
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司