前端聚合法制备聚N-异丙基丙烯酰胺/碳纳米管复合水凝胶及其性能
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(50772013);2011年度河南省高等学校青年骨干教师资助计划(2011GGJS-168);2012年度河南省科技厅科技攻关项目(122102310430)


Frontal Polymerization Preparation of Poly(N-isopropylacrylamide/carbon nanotubes) Hydrogels
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    用前端聚合法制备了聚(N-异丙基丙烯酰胺)/多壁碳纳米管 (PNIPAM/MWCNTS)复合水凝胶, 对产物的微观形貌、温敏性、力学性能和释药性能进行了研究。结果表明,PNIPAM/MWCNTS复合水凝胶具有温度敏感性,MWCNTS的加入不影响水凝胶的低临界转变温度,随MWCNTS含量增加,水凝胶吸水能力降低,力学强度显著提高,当MWCNTS的含量由0%增至10%时,水凝胶的压缩强度从88 kPa增加到666 kPa。复合水凝胶具有良好的药物缓释性能。

    Abstract:

    Poly(N-isopropylacrylamide/carbon nanotubes) (PNIPAM/MWCNT)composite hydrogels were prepared by frontal polymerization. The morphology, thermosensitivity, mechanical properties and drug release properties of PNIPAM/MWCNT hydrogel were examined. The results show that the PNIPAM/MWCNTS hydrogels are temperature-sensitive. The incorporation of MWCNTS does not influence the lower critical solution temperature (LCST) of hydrogel but reduces its swelling abilities. MWCNTS improve the mechanical properties of PNIPAM/MWCNTS hydrogel. When the content of MWCNTS increases from 0% to 10%, the compressive strength of hydrogel is improved form 88 kPa to 666 kPa. The composite hydrogels show excellent drug release properties.

    参考文献
    相似文献
    引证文献
引用本文

冯巧, 夏志伟, 张亚轩, 韩未利.前端聚合法制备聚N-异丙基丙烯酰胺/碳纳米管复合水凝胶及其性能[J].高分子材料科学与工程,2016,32(5):134-138. Qiao Feng, Zhiwei Xia, Yaxuan Zhang, Weili Han. Frontal Polymerization Preparation of Poly(N-isopropylacrylamide/carbon nanotubes) Hydrogels[J]. Polymer Materials Science & Engineering,2016,32(5):134-138.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2016-05-20
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司