聚乳酸多孔微球的制备及释药性能
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目( 51406141);福建省教育厅 (JK2014052, JA13320);南平市科技局项目(N2012z06(5))


Fabrication of Porous Poly(L-lactic acid) Porous Microspheres and Its Controlled Drug Release Property
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    将聚乳酸(PLLA)/四氢呋喃(THF)溶液分散在甘油(连续相)中,通过自乳化结合热致相分离(TIPS)制备一系列PLLA多孔微球,微球由捆束状纳米纤维组成。通过改变PLLA浓度、(PLLA/THF)∶甘油比值、溶剂种类以及淬火温度等条件研究所得多孔微球结构与形貌。结果表明,PLLA的质量分数为2%~5%、m(PLLA/THF)∶m(甘油)=1∶3、-20 ℃和-196 ℃淬火均能得到形状规整的PLLA多孔微球。多孔微球孔隙率和比表面积最高可达95.44%和32.53 m2/g。PLLA多孔微球对牛血清蛋白的药载量为0.355 mg/mg,30 h内释放率达到59.8%,是一种非常良好的药物缓释载体。

    Abstract:

    Through dispersing the poly(L-lactic acid)(PLLA)/tetrahydrofuran (THF) solution in glycerol, a series of PLLA porous microspheres composed of sheave-like nanofibers were fabricated through a method which combines the self-emulsification with thermally induced phase separation (TIPS). Various structures and morphologies of the microspheres were fabricated by controlling PLLA concentration, solvent, mass ratio of (PLLA/THF)∶ glycerol, and the quenching method. The results indicate that the microspheres with regular shapes are synthesized when the mass fraction is 2%~5%, the m(PLLA/THF)∶m(glycerol) is 1∶3 and quenching at -20 ℃ and -196 ℃. The porosity and the specific surface area of the microspheres can reach 95.44% and 32.53 m2/g, respectively. The load capacity of PLLA microspheres for bovine serum albumin (BSA) is 0.355 mg/mg and the drug releasing rate within 30 h is 59.8%, which reflect that this kind of microspheres is a great drug carrier for sustaining release.

    参考文献
    相似文献
    引证文献
引用本文

胡家朋, 刘瑞来, 饶瑞晔, 赵瑨云, 吴代赦.聚乳酸多孔微球的制备及释药性能[J].高分子材料科学与工程,2016,32(5):144-150. Jiapeng Hu, Ruilai Liu, Ruiye Lao, Junyun Zhao, Daishe Wu. Fabrication of Porous Poly(L-lactic acid) Porous Microspheres and Its Controlled Drug Release Property[J]. Polymer Materials Science & Engineering,2016,32(5):144-150.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2016-05-20
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司