气相二氧化硅改性热塑性聚酰亚胺薄膜的制备及性能
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Preparation and Properties of Thermoplasticity Polyimide Hybrid Films Modified by Fumed SiO2
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以4,4'-双(3-氨基苯氧基)联苯(4,3-BAPOBP)和均苯四甲酸二酐(PMDA)为单体,气相二氧化硅(Fumed SiO2)为纳米粒子的前驱体,通过原位聚合法在N,N-二甲基乙酰胺(DMAc)中制备出SiO2质量分数不同的热塑性聚酰亚胺(TPI)纳米复合薄膜。采用红外光谱仪、扫描电镜对复合薄膜的微观结构进行了表征,并对其力学和介电性能进行了测试和研究。结果表明,成功制备了亚胺化完全的TPI/SiO2复合薄膜;SiO2在基体中具有良好的分散性;适量添加SiO2能够显著提高基体的力学和介电性能,且当其质量分数(下同)为6%时,复合薄膜的拉伸强度和击穿强度均达到最大值,分别提高了15%和22%;复合薄膜的介电常数随SiO2质量分数的增加而单调递增,含15% SiO2薄膜的介电常数在1 kHz时由3.5增加到了4.15。

    Abstract:

    Thermoplasticity polyimide/SiO2 (TPI/SiO2) hybrid films were prepared with 4,4-bis(3-aminophenoxy)biphenyl (4,3-BAPOBP) and pyromellitic dianhydride (PMDA) via an in-situ dispersive polymerization and thermal imidization means while fumed SiO2 was added as precursor. The solvent was N,N-dimethylacetamide (DMAc). The microstructure of hybrid films was characterized by FT-IR and SEM, the mechanical and dielectric properties were tested by different instruments. The results indicate that TPI/SiO2 hybrid films are successfully prepared. The fumed SiO2 distributes uniformly in the matrix. The mechanical and dielectric properties of hybrid films can be markedly improved by the addition of appropriate amounts of SiO2. At a SiO2 content of 6%, the tensile strength and breakdown strength of the films increase by 15% and 22%, respectively, compared with the neat TPI. The dielectric constants of films increase with the addition of SiO2 nanoparticles content, at the frequency of 1 kHz, it increases from 3.5 to 4.15 as the SiO2 content increases from 0% to 15%.

    参考文献
    相似文献
    引证文献
引用本文

崔晓萍, 朱光明, 刘文元.气相二氧化硅改性热塑性聚酰亚胺薄膜的制备及性能[J].高分子材料科学与工程,2016,32(5):151-155. Xiaoping Cui, Guangming Zhu, Wenyuan Liu. Preparation and Properties of Thermoplasticity Polyimide Hybrid Films Modified by Fumed SiO2[J]. Polymer Materials Science & Engineering,2016,32(5):151-155.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2016-05-20
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司