Abstract:2,2-Bis[4-(3,4-dicarboxyphenoxy)phenyl] propane dianhydride (BPADA) was synthesized through condensation, hydrolyzation, acidifation and dehydration by using bisphenol A and 4-chlorophthalic anhydride as main raw material. Its structure was determined through 1H-NMR and FT-IR. The epoxy resin systems cured with BPADA and phthalic anhydride(PA), respectively, were studied through DSC and DMA. Then the mechanical properties of cured products were investigated. The results indicate that BPADA is synthesized successfully by four steps.The two cured systems are numerically similar over apparent activation energy(Ea) and the reaction order. The Ea of the E-51/BPADA is slightly higher than that of E-51/PA, but the curing rate of E-51/PA is higher. The results also show that the glass transition temperature(Tg) of E-51/BPADA is increased by 40 ℃ than that of E-51/PA. Compared with the E-51/PA, the impact strength of E-51/BPADA is increased by 35%, while the bending performance decreases slightly. The SEM pictures indicate that the impact fracture surface of E-51/BPADA thermosets shows a typical ductile fracture, and the E-51/PA appears a brittle fracture.