甲基丙烯酸马来海松环氧树脂/聚氨酯丙烯酸酯/碳纳米管复合材料的制备和性能
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

河北省高层次人才资助项目(A201400504)


Preparation and Properties of Maleopimaric Acid Epoxy Methylacrylate/Polyurethane Acrylate/Carbon Nanotube Composites
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    为了保护环境和利用可再生资源,文中合成了甲基丙烯酸马来海松酸环氧树脂(MREMA)和聚氨酯丙烯酸酯(PUA), 将MREMA和PUA按质量比1∶1进行UV固化反应,并用羟基多壁碳纳米管(HCNTs)改性制备纳米复合材料。利用红外光谱仪、热重分析仪、动态力学谱仪和漆膜测试仪等研究了碳纳米管对MREMA/PUA材料的热性能、动态力学性能以及涂膜性能的影响。结果表明,加入HCNTs可以明显改善材料的热性能和动态力学性能。加入0.5% HCNTs,材料的玻璃转化温度Tg达到173.4 ℃,与纯组分相比提高了64.6 ℃;加入0.7% HCNTs,材料的起始热分解温度提高了38.2 ℃。UV-光固化涂膜的硬度也因加入HCNTs而提高,且涂膜具有很好的物理化学性能。

    Abstract:

    In order to protect the environment and utilize renewable resources, maleopimaric acid epoxy methyl acrylate (MREMA) and polyurethane acrylate (PUA) were synthesized. According to mass 1∶1 proportion of MREMA and PUA, the nanocomposites of MREMA/PUA with different ratio of hydroxyl-containning carbon nanotubes (HCNTs) were prepared. Structures of MREMA and PUA were characterized by FT-IR and NMR. The curing process, dynamic mechanical properties and thermal stabilities and properties of coating films for nanocomposites were characterized by DMA, TGA, TEM and film testers. The results show that HCNTs can enhance the glass transition temperature, Tg, and thermal properties of the cured MREMA/PUA materials. The Tg of the MREMA/PUA/HCNTs nanocomposites with 5% HCNTs is 173.4 ℃, which is 64.6 ℃ higher than that of the pure resin system, and when the content of HCNTs is 7%, the 5% mass loss temperature, Td5, is enhanced approximately 38.2 ℃. The UV-cured coating film has excellent physical and chemical properties.

    参考文献
    相似文献
    引证文献
引用本文

王丹, 徐流龙, 霍莉, 高俊刚.甲基丙烯酸马来海松环氧树脂/聚氨酯丙烯酸酯/碳纳米管复合材料的制备和性能[J].高分子材料科学与工程,2016,32(6):26-31. Dan Wang, Liulong Xu, Li Huo, Jungang Gao. Preparation and Properties of Maleopimaric Acid Epoxy Methylacrylate/Polyurethane Acrylate/Carbon Nanotube Composites[J]. Polymer Materials Science & Engineering,2016,32(6):26-31.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2016-06-11
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司