电子束辐射对农作物秸秆粉/聚乙烯木塑复合材料结构与性能的影响
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

四川省应用基础研究计划(2014JY0156);四川省科技支撑计划(2015FZ0104)


Effect of Electron Beam Irradiation on the Structure and Properties of Crop Straw Flour/Polyethylene Composites
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    在不添加偶联剂和相容剂的情况下,将农作物秸秆粉(CSF)和聚乙烯树脂(LDPE)直接熔融共混复合制备木塑复合材料LDPE/CSF,研究高能电子束辐射(EB)对该木塑复合材料结构与性能的影响。力学性能测试表明,LDPE/CSF木塑复合材料的力学强度随辐射剂量的增加而增大;扫描电镜分析表明,随着辐射剂量的增加,木塑复合材料断面越来越平整,材料断面观察不到明显的农作物秸秆粉脱落现象;差示扫描量热分析表明,随着辐射剂量的增加,LDPE/CSF木塑复合材料的熔融峰逐渐向低温方向移动;24 h吸水率测试表明,经电子束辐射处理后的LDPE/CSF木塑复合材料吸水性能显著改善。这是由于电子束辐射使LDPE发生一定程度的交联,使原本相容性差的CSF和LDPE能够形成稳定的网络结构,提高LDPE/CSF木塑复合材料的界面相容性和力学强度,改善其耐水性能;另一方面,电子束辐射使LDPE/CSF木塑复合材料的结晶缺陷增多,降低其熔融温度。

    Abstract:

    Crop straw flour/polyethylene (LDPE/CSF) composites without adding coupling agent and compatibilizer were prepared by direct melt blending, and the effects of electron beam irradiation on the structure and properties of LDPE/CSF composites were studied. The results show that the mechanical properties and water absorption of the LDPE/CSF composites can be improved significantly through the electron beam irradiation, and the interface compatibility is also improved because of formation of the stable cross-linked network structure between LDPE and CSF, on the other hand, due to the increase of crystal defects in PE irradiated by electron beam irradiation, the melting temperature of LDPE/CSF composites decreases. Radiation processing is a good and new technology to prepare wood-plastic composites with excellent comprehensive properties, and with a wide range of application.

    参考文献
    相似文献
    引证文献
引用本文

郭丹, 赵星, 黄科, 刘思阳, 陈竹平, 彭朝荣.电子束辐射对农作物秸秆粉/聚乙烯木塑复合材料结构与性能的影响[J].高分子材料科学与工程,2016,32(6):63-67. Dan Guo, Xing Zhao, Ke Huang, Siyang Liu, Zhuping Chen, Chaorong Peng. Effect of Electron Beam Irradiation on the Structure and Properties of Crop Straw Flour/Polyethylene Composites[J]. Polymer Materials Science & Engineering,2016,32(6):63-67.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2016-06-11
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司