复合型导电纤维的制备及性能
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

江苏省教育厅产业化推进项目(JH10-29)


Preparation and Properties of Composite Conductive Fiber
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    选用实验室自制的白色导电TiO2熔融造粒制备导电母粒,然后通过复合熔融纺丝技术制备4种不同截面形貌的白色导电纤维,采用扫描电镜、X射线衍射仪和热重分析仪等对其结构和性能进行详细表征。通过与共混型导电纤维对比发现,4种复合型导电纤维的拉伸强度明显提高,同时纤维体积电阻率下降了3个数量级,复合纺丝能够有效提高纤维的综合性能;抗静电性能研究发现,织物抗静电性与纤维导电性不呈正比关系,但其与复合导电纤维中导电部分的尖锐程度和裸露表面积有一定关系:导电部分形貌越尖锐,裸露表面积越大,纤维抗静电性能越好;进一步研究表明,对称腰形复合型导电纤维综合性能最优,可应用于抗静电织物的制备。

    Abstract:

    First, the self-made white conductive TiO2 was used to prepared conductive masterbatch by melt blending; then the conductive fibers with different section morphologies were prepared by composite melt spinning. The structure and properties of the resulting conductive fiber were characterized by SEM, XRD and TG. Compared with blending conductive fiber, the composite conductive fibers show better tensile strength, and the conductivity of composite conductive fibers is lower three orders in magnitude than that of blending conductive fiber, confirming that the composite melt spinning can improve the comprehensive performances of conductive fiber effectively. The antistatic property of fabric doesn’t have directly proportional relationship with conductivity of composite fibers, but has a certain relationship with the sharpness and exposed surface area of conductive masterbatch in the composite conductive fibers: the sharper and the greater exposed surface area of conductive masterbatch is, the better performance the antistatic fiber has. Further studies show the symmetrical kidney-shaped composite conductive fiber has the best overall performance, which can be widely used in antistatic fabrics.

    参考文献
    相似文献
    引证文献
引用本文

延亚峰, 宋春雨, 曹敏悦, 季志刚, 葛明桥, 巨安奇.复合型导电纤维的制备及性能[J].高分子材料科学与工程,2016,32(6):143-147. Yafeng Yan, Chunyu Song, Minyue Cao, Zhigang Ji, Mingqiao Ge, Anqi Ju. Preparation and Properties of Composite Conductive Fiber[J]. Polymer Materials Science & Engineering,2016,32(6):143-147.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2016-06-11
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司