反应性共混天然橡胶增韧聚乳酸
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

贵州省科学技术基金项目(黔科合J字[2015]2006号);高分子材料工程国家重点实验室开放课题基金(sklpme2015-4-35)


Toughening of Polylactide by Reactive Blending with Natural Rubber
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以过氧化二异丙苯(DCP)为交联剂,经哈克密炼机反应性共混,制备了聚乳酸/天然橡胶(PLA/NR)交联共混物。考察了交联剂DCP对PLA/NR共混物的熔体扭矩、形貌、结晶性、热稳定性和力学性能的影响。研究结果表明,添加DCP引发了PLA与NR体系的交联,熔体扭矩值增大。DCP对PLA/NR体系的热稳定性影响不大。当DCP含量为0.5%时,PLA/NR共混物的结晶度达到最高值,其冲击强度也达到最大值,是纯PLA的3倍。当DCP含量为2%时,共混物呈共连续相结构,其断裂伸长率达到最大值,相对于纯PLA提高了50%。

    Abstract:

    Crosslinked polylactide/natural rubber (PLA/NR) blends were fabricated by reactive blending in a Hakke internal mixer using dicumyl peroxide (DCP) as crosslinking agent. The effect of DCP on the melt torque, morphology, crystallization, thermal stability, and mechanical properties of the PLA/NR composites was studied in detail. The results show that the addition of DCP induces crosslinking of the PLA/NR blend system, leading to an increased melt torque value. DCP has an insignificant impact on the thermal stability of the blends. The PLA/NR blend shows the highest degree of crystallinity when DCP is added at a concentration of 0.5%, and the impact strength also reaches the maximum value, which is 3 times that of pure PLA. When 2% DCP is introduced, the blend shows a co-continuous phase, and the elongation at break reaches the maximum point, which is improved by 50% as compared to pure PLA.

    参考文献
    相似文献
    引证文献
引用本文

张春梅, 黄云, 淡宜.反应性共混天然橡胶增韧聚乳酸[J].高分子材料科学与工程,2016,32(6):171-176. Chunmei Zhang, Yun Huang, Yi Dan. Toughening of Polylactide by Reactive Blending with Natural Rubber[J]. Polymer Materials Science & Engineering,2016,32(6):171-176.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2016-06-11
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司