基于聚醚的热增黏接枝聚合物的合成及性能
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

高分子材料工程国家重点实验室开放基金探索项目(sklpme2014-2-06);油气田应用化学四川省重点实验室开放课题(YQKF201403)


Synthesis and Properties of Thermoviscosifying Polyether-Based Graft Polymers
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    聚合物水溶液黏度通常会随温度升高而降低。为了解决高温下聚合物溶液的增黏难题,文中利用聚醚(F127)分别与丙烯酸、丙烯酰胺、2-丙烯酰胺基-2-甲基丙磺酸接枝共聚,得到了系列热增黏聚合物。考察了聚合条件、聚合物浓度、亲水单体的性质对聚合物溶液热增黏能力的影响。结果表明,聚合物浓度越高、聚合物相对分子质量越高,聚合物的热增黏性能越好,热缔合温度也越低。

    Abstract:

    Generally, viscosity of polymer aqueous solution decreases with increasing temperature, which limits the wide application of polymer solutions. To solve this problem, acrylic acid, acrylamide or 2-acrylamido-2-methylpropanesulfonic acid were used to graft on a polyether (F127) in this study, respectively, to obtain a series of polymers with thermoviscosifying behavior. Moreover, the effect of polymerization conditions, polymer concentrations and the nature of hydrophilic monomer affecting the thermoviscosifying ability of polymer solutions were examined. It is found that higher polymer molecular weight and concentration result in better thermoviscosifying ability and lower associated temperature.

    参考文献
    相似文献
    引证文献
引用本文

谢璐瑶, 程金梁, 冯玉军, 鲁红升.基于聚醚的热增黏接枝聚合物的合成及性能[J].高分子材料科学与工程,2016,32(7):29-34. Luyao Xie, Jinliang Cheng, Yujun Feng, Hongsheng Lu. Synthesis and Properties of Thermoviscosifying Polyether-Based Graft Polymers[J]. Polymer Materials Science & Engineering,2016,32(7):29-34.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2016-07-17
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司