一种超支化半芳香聚酰胺的合成及表征
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

广东省自然科学基金资助项目 (S2011010001544);高分子材料工程国家重点实验室开放课题基金(KF201208);国家星火计划项目(2012GA780015)


Synthesis and Properties of Hyperbranched SemiAromatic Polyamide
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以乙二胺和均苯三甲酰氯为原料通过A2+B3方法合成超支化半芳香型聚酰胺(HBPE),研究了反应条件对聚合反应的影响,利用傅里叶变换红外光谱、核磁共振谱等对合成的超支化半芳香聚酰胺进行了结构表征。研究结果表明,控制单体官能团摩尔比(COCl∶NH2)为1.1∶1,催化剂LiCl浓度为0.0125 g/L,反应温度为50 ℃,反应时间为14 h,制得的HBPE的相对分子质量最大,其最大重均相对分子质量及其分布分别为4.3×104和1.59。热重分析结果表明HBPE具有较好的热稳定性。

    Abstract:

    Trimesoyl chloride and ethylenediamine were chosen as monomers to prepare hyperbranched polyamides(HBPE) via A2 +B3 polycondensation. The influences of reaction conditions on the viscosity of the polymer were studied. The structures of polymerization products were confirmed as polyamides according to the spectra of FT-IR, 1H-NMR and 13C-NMR. The results show that the molecular weight of HBPE is biggest when three benzene formyl chloride concentration is 0.5 mol/L, the reaction temperature is 50 ℃, the reaction time is 14 h, LiCl dosage is 0.0125 g/L, monomer ratio of functional group (n(COCl)∶n(NH2)) is 1.1∶1. Thermal gravimetric analysis (TG) shows that HBPE has good thermal stability.

    参考文献
    相似文献
    引证文献
引用本文

冯宗财, 袁爽, 刘芳, 赵世鹏, 宋秀美, 郭玉婷, 钟诗颖.一种超支化半芳香聚酰胺的合成及表征[J].高分子材料科学与工程,2016,32(7):35-40. Zongcai Feng, Shuang Yuan, Fang Liu, Shipeng Zhao Xiumei Song, Yuting Guo, Shiying Zhong. Synthesis and Properties of Hyperbranched SemiAromatic Polyamide[J]. Polymer Materials Science & Engineering,2016,32(7):35-40.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2016-07-17
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司