无规共聚聚丙烯/乙烯-辛烯共聚物共混体的增韧机理与相容性
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

四川省教育厅科研重点项目(07ZA0106)


Toughening Mechanism and Compatibilities of Roundly-Polymerized-Polypropylene/Polyolefin-Elastomer Blends
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    考察了不同乙烯-辛烯共聚物(POE)含量的无规共聚聚丙烯(PPR)共混体(PPR/POE)的冲击韧性、断面形貌,并用差示扫描量热分析(DSC)和X射线衍射法(WAXD)研究了PPR/POE共混体的增韧机理和相容性。结果表明,随POE含量增加,共混体的冲击韧性呈增加的趋势,共混体POE25的冲击强度在23 ℃和-35 ℃分别为32 kJ/m2和6.32 kJ/m2,分别是透明PPR的7倍和6倍。PPR/POE共混体的DSC熔融曲线和WAXD谱图揭示了PPR和POE中的乙烯链段形成共晶结构,因此POE与PPR间相容性随POE含量增加。

    Abstract:

    The impact toughness and fracture surface of roundly-polymerized-polypropylene/polyolefin-elastomer (PPR/POE) blends with different contents of POE were investigated and the toughening mechanism and compatibility of the PPR/POE blends were studied by DSC and WAXD. The results indicate that with the increase of POE content, the impact toughness for the blends increases and the impact toughness of the blend POE25 is 32.00 kJ/m2 and 6.32 kJ/m2, which is 7 times and 6 times higher than PPR, respectively, when the testing temperature is 23 ℃ and -35 ℃, respectively. The DSC curves and WAXD spectrum of PPR/POE blends reveal that there are symbiotic crystals of PE links from PPR and POE, therefore, the compatibility between PPR and POE increases.

    参考文献
    相似文献
    引证文献
引用本文

赵兴科, 王苓.无规共聚聚丙烯/乙烯-辛烯共聚物共混体的增韧机理与相容性[J].高分子材料科学与工程,2016,32(7):68-73. Xingke Zhao, Ling Wang. Toughening Mechanism and Compatibilities of Roundly-Polymerized-Polypropylene/Polyolefin-Elastomer Blends[J]. Polymer Materials Science & Engineering,2016,32(7):68-73.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2016-07-17
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司