不同填料对氟橡胶在热酸环境下黏弹行为的影响
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(515473098,51173110)


Effect of Different Fillers on the Fluororubber Viscoelasticity in Hot Acid Environment
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    通过氟橡胶常用的无机补强填料(CaCO3、BaSO4、滑石粉)来研究其对氟橡胶在酸性环境下力学性能的变化以及黏弹行为的影响。对比添加20phr不同补强填料的氟橡胶经过盐酸溶液浸泡后拉伸强度的变化、质量的变化率以及红外光谱图和热扫描电镜图来进一步分析其在热酸环境下的腐蚀机理和力学性能变化的方式。实验结果表明,添加滑石粉的氟橡胶在热酸性环境下的力学性能保持得最好,并且其蠕变和应力松弛行为变化最小。

    Abstract:

    Inorganic reinforcing fillers (CaCO3, BaSO4, talcum powder) were used to fill fluororubber (FKM) to study the mechanical properties of FKM in acid environment. Contrasting to FKM added 20 phr different reinforcing fillers in the HCl solution, the change of tensile strength, the change rate of mass, viscoelasticity, infrared spectrum and SEM of FKM were examined to further analyze the corrosion mechanism and mechanics performance change in the environment of hot acid. Experimental results show that mechanical properties of FKM filled with talcum powder under the acidic conditions are best, and the creep and stress relaxation behavior changes are minimal.

    参考文献
    相似文献
    引证文献
引用本文

李世泽, 崔雨果, 方庆红.不同填料对氟橡胶在热酸环境下黏弹行为的影响[J].高分子材料科学与工程,2016,32(7):74-78. Shize Li, Yuguo Cui, Qinghong Fang. Effect of Different Fillers on the Fluororubber Viscoelasticity in Hot Acid Environment[J]. Polymer Materials Science & Engineering,2016,32(7):74-78.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2016-07-17
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司