聚丙烯腈基碳纤维的表面涂覆改性对其在树脂基体中分散特性的影响
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

高等学校博士学科点专项科研基金项目(20121201110002)


Influence of Surface-Coated Modification of Polyacrylonitrile-Based Carbon Fiber on Dispersion in Resin Matrix
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以阴离子表面活性剂脂肪醇聚氧乙烯醚磷酸盐(AEOPK)为处理剂对聚丙烯腈(PAN)基碳纤维表面进行涂覆改性。通过接触角仪、法拉第筒、场发射扫描电子显微镜和X射线光电子能谱对碳纤维的表面性质进行了研究。测试结果表明,当处理剂的质量分数和吸附量分别为0.5%和3.5 mg/g时,AEOPK可在纤维表面均匀分布,碳纤维在树脂基体中的分散性得到明显改善。分析了处理剂对碳纤维/环氧树脂复合材料弯曲性能的影响,发现经过涂覆处理后碳纤维/环氧树脂复合材料弯曲强度和模量较未处理的试样分别提高了3.11倍和1.90倍。研究表明,碳纤维界面间的润湿力和电荷斥力的增加,是其分散性和复合材料弯曲性能增强的主要原因。

    Abstract:

    Fatty alcohol polyoxyethylene ether phosphate (AEOPK) was employed as a treatment agent for polyacrylonitrile(PAN)-based carbon fiber (CF) surface. The optimum concentration and adsorption amount were decided 0.5% and 3.5 mg/g according to the results of contact angle and dispersion coefficient. In addition, the surface charges, morphology and groups of modified CFs were investigated by Faraday cup, FE-SEM and XPS. The results indicate that the AEOPK is evenly distributed on the CF surface, and the dispersion of CFs in the resin matrix is improved dramatically. Furthermore, the flexural strength and modulus of the treated CF composite are proved to increase by 3.11 times and 1.90 times by flexural tests. Research shows that the main reasons for the increase of dispersion and flexural property is attributed to the enhanced wettability of the CF and matrix at their interface and repulsion between the monofilaments.

    参考文献
    相似文献
    引证文献
引用本文

吴波, 郑帼, 刘燕军, 孙玉, 王蕾.聚丙烯腈基碳纤维的表面涂覆改性对其在树脂基体中分散特性的影响[J].高分子材料科学与工程,2016,32(7):79-83. Bo Wu, Guo Zheng, Yanjun Liu, Yu Sun, Lei Wang. Influence of Surface-Coated Modification of Polyacrylonitrile-Based Carbon Fiber on Dispersion in Resin Matrix[J]. Polymer Materials Science & Engineering,2016,32(7):79-83.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2016-07-17
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司