注塑成型二亚苄基山梨糖醇/茂金属等规聚丙烯的结晶结构及力学性能
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

高分子材料工程国家重点实验室开放课题(sklpme2014-4-28);国家自然科学基金资助项目(51503023)


Crystalline Morphology and Mechanical Properties of Injection Molded Dibenzylidene Sorbitol/Metallocene-Made Isotactic Polypropylene
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    利用普通注塑(CIM)和振动剪切注塑(OSIM)方法制备了二亚苄基山梨糖醇(DBS)不同质量含量的茂金属等规聚丙烯(m-iPP)试样,并研究了制品的结晶结构和性能。对试样的X射线衍射和差示扫描量热分析表明,DBS的加入使γ晶相对含量(fγ)减少,这是由于DBS生成网络结构增强了成型过程中α和γ晶的取向生成,进而抑制了试样中的γ晶含量。对试样的力学性能研究发现,添加0.5%DBS且经过OSIM成型的m-iPP试样具有最高的拉伸强度为45.2 MPa。

    Abstract:

    The morphology and property of metallocene-made isotactic polypropylene (m-iPP) samples containing different amounts of dibenzylidene sorbitol (DBS) prepared by conventional injection molding (CIM) and oscillatory shear injection molding (OSIM) were investigated. The results of WAXD and DSC measurements show that the adding of DBS reduces the fraction of γ-crystals for the injection molding samples. DBS self-organizes into a three-dimensional network in melt, and enhances the orientation of α- and γ-crystals for all the samples, thus, the content of γ-crystals is suppressed. The CIM and OSIM m-iPP samples containing different amounts of DBS exhibit different mechanical properties. The tensile strength of OSIM m-iPP samples reaches the highest value of 45.2 MPa.

    参考文献
    相似文献
    引证文献
引用本文

王艳, 徐玲, 赵建, 曲敏杰, 刘国军, 刘俊龙, 冯钠.注塑成型二亚苄基山梨糖醇/茂金属等规聚丙烯的结晶结构及力学性能[J].高分子材料科学与工程,2016,32(7):89-95. Yan Wang, Ling Xu, Jian Zhao, Minjie Qu, Guojun Liu, Junlong Liu, Na Feng. Crystalline Morphology and Mechanical Properties of Injection Molded Dibenzylidene Sorbitol/Metallocene-Made Isotactic Polypropylene[J]. Polymer Materials Science & Engineering,2016,32(7):89-95.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2016-07-17
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司