Abstract:Three HDPE resins with different chain structures were selected to prepare HDPE casting films, and then microporous membranes by uniaxially stretching. GPC, FT-IR and rotational rheometer were used to characterize chain structures and relaxation spectra of HDPE resins. The oriented lamellar structure parameters in HDPE casting films were measured by DSC and FT-IR. The microporous structure of resulting microporous membranes was evaluated with porosity and permeability. It is found that the crystallinity and lamellar thickness in casting films are mainly affected by branching type and branching extent, while the lamellar orientation is dominantly controlled by molecular weight and high molecular weight fraction of HDPE resins. The crystallinity and lamellar thickness in the three HDPE casting films follow the order of 5202B>5502FA>5502XA. The order of lamellar orientation is 5502XA>5202B>5502FA, and the order of elastic recovery is 5202B>5502FA>5502XA. The porosity and permeability of resulting membranes are proportional to elastic recovery of casting films. The casting film prepared with 5202B has more perfect oriented lamellar structure and excellent microporeforming performance, due to its modest molecular weight, narrow molecular weight distribution, and low level of branching. After uniaxially stretching, the resulting membrane possesses high porosity and permeability.