聚乳酸接枝硅烷偶联剂的制备及对聚乳酸/木粉复合材料的影响
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家科技支撑“十二五”计划项目(2012BAD32B03)


Preparation of Poly( Lactic Acid ) Grafted with Silane Coupling Agent and Its Influence on Poly(Lactic Acid)/Wood Flour Composites
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    通过反应挤出制备了聚乳酸接枝γ-(甲基丙烯酰氧基)丙基三甲氧基硅(PLA-g-MPS),研究其在聚乳酸/木粉(PLA/WF)复合材料中的偶联作用。核磁共振氢谱证实MPS已接枝到PLA上。使用溶剂洗脱复合材料粒子中的PLA相从而得到WF相,对其红外光谱的分析表明PLA-g-MPS可与WF发生共价键偶联作用。力学性能测试表明,在大分子偶联剂用量仅为3%时,相比未添加的复合材料,拉伸强度、弯曲强度和冲击强度分别提高17.5%,12.4%和88.4%。对复合材料的动态力学分析表明,添加大分子偶联剂会提升PLA与WF间相互作用力从而使材料在玻璃态下的储能模量升高。

    Abstract:

    Poly(lactic acid) grafted with γ-methacryloxy propyl trimethoxyl silane(PLA-g-MPS) was prepared through reactive extrusion and the coupling effect was studied by composites of poly(lactic acid)/wood flour (PLA/WF). MPS was proved to be grafted on PLA by 1H-nuclear magnetic resonance (1H-NMR). PLA in composites was eluted with solvent and the residual WF was determined by FT-IR spectra. FT-IR spectra indicate that PLA-g-MPS has a function of coupling with WF by covalent bond. Compared with composite without PLA-g-MPS, mechanical property tests show that tensile strength, flexural strength and impact strength of the composite containing 3% macromolecular coupling agent are enhanced by 17.5%, 12.4% and 88.4% respectively. Dynamic mechanical analysis (DMA) reveals that interaction force between PLA and WF is improved with the addition of macromolecular coupling agent so that storage modulus under glass state increases.

    参考文献
    相似文献
    引证文献
引用本文

杨琳强, 金立维.聚乳酸接枝硅烷偶联剂的制备及对聚乳酸/木粉复合材料的影响[J].高分子材料科学与工程,2016,32(7):125-130. Linqiang Yang, Liwei Jin. Preparation of Poly( Lactic Acid ) Grafted with Silane Coupling Agent and Its Influence on Poly(Lactic Acid)/Wood Flour Composites[J]. Polymer Materials Science & Engineering,2016,32(7):125-130.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2016-07-17
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司