碳基纳米填料填充聚丙烯纳米复合材料的制备与流变特性
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(NSFC51473018,51503017)


Preparation and Rheologiacal Behaviour of Polypropylene/Carbon-Based Filler Nanocomposites
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用熔融共混法分别制备了多壁碳纳米管(MWCNT)、炭黑(CB)、石墨微片(GNP)填充聚丙烯(PP)纳米复合材料。采用毛细管流变仪和旋转流变仪对所制备的复合材料的黏度尺度效应和动态流变特性进行了实验研究。研究发现,填充材料的形态和含量都会对黏度的尺度效应和粘弹性产生影响。各填充体系的剪切黏度都会随着粒子质量分数的增加而增大,不同直径口模下的剪切黏度偏差值有逐渐减小的趋势,炭黑填充体系具有明显的黏度尺度效应。填充体系的储能模量和损耗模量均随着粒子质量分数的增加而增大。

    Abstract:

    Polypropylene/carbon nano-tubes (PP/CNT), polypropylene/carbon-black (PP/CB) and polypropylene/graphene nanoplatelets (PP/GNP) nanocomposites were prepared by melt blending. The viscosity geometry dependency effect and dynamic rheological properties of PP/carbon-based nanocomposites were explored by capillary rheometer and rotary rheometer. The results show that the filler appearance and content can both influence the viscosity geometry dependence and viscoelasticity of the composites. The shear viscosity of all samples increases with the mass fraction increase of carbon-based filler, shear viscosity deviation under different dies will gradually decrease, the PP/CB system shows apparent viscosity geometry dependency. The storage modulus and loss modulus of all samples both increase with the mass fraction increase of carbon-based filler.

    参考文献
    相似文献
    引证文献
引用本文

张凯,林祥,任冬云.碳基纳米填料填充聚丙烯纳米复合材料的制备与流变特性[J].高分子材料科学与工程,2016,32(7):170-175. Kai Zhang, Xiang Lin, Dongyun Ren. Preparation and Rheologiacal Behaviour of Polypropylene/Carbon-Based Filler Nanocomposites[J]. Polymer Materials Science & Engineering,2016,32(7):170-175.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2016-07-17
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司