四臂星形聚乙二醇-苯甲酸雌二醇大分子前药的合成与表征
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

广东省自然科学基金资助项目(07300675);华南理工大学中央高校基本科研业务费项目(2015ZZ062)


Synthesis and Characterization of Four-Arm Star-Shaped Poly(ethylene glycol)-Esrtdaiol Benzoate Pro-Drug
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用哌啶氧化物自由基氧化法将四臂星形聚乙二醇(sPEG,Mn=4400)的端羟基氧化为端羧基,合成得到了一种端羧基四臂星形聚乙二醇(sPEG-CA),并将其对苯甲酸雌二醇(EB)的17位羟基进行酯化修饰,得到四臂星形聚乙二醇-苯甲酸雌二醇大分子前药(sPEG-EB),用红外光谱和核磁共振确认了各步合成产物的结构。研究结果表明,与EB原药相比,sPEG-EB在水中的有效溶解度提高了约1630倍。sPEG-EB在pH7.2的模拟体液中的释药试验表明,其在0~2d内具有良好的零级释药特征,2d时的累积释药率达到61%,5d时的累积释药率则可达96.5%,说明sPEG-CA适合作为注射用EB的大分子前药载体。

    Abstract:

    Carboxylic acid terminated four-arm star-shaped poly(ethylene glycol) (sPEG-CA, Mn=4400) was obtained by a novel method based on the oxidation of primary alcohols to carboxylic acids using 2,2,6,6-tetramethylpiperidinyl-1-oxyl (TEMPO), sodium bromide (NaBr) and sodium hypochlorite (NaOCl), under a mild reaction condition. Then four-arm star-shaped poly(ethylene glycol)-esrtdaiol benzoate pro-drug (sPEG-EB) was synthesized with the PEGylating of esrtdaiol benzoate (EB). The structures of the polymers obtained were characterized and confirmed by FT-IR and 1H-NMR. The in vitro releasing properties of sPEG-EB and EB in pH 7.2 buffer solutions were also detailed, and the results show that the releasing of EB from the sPEG-EB pro-drug is almost linearly in 0~2 d with the integral releasing rate of 61%, which makes sPEG-EB a potential and more suitable carrier for injection pro-drug of EB.

    参考文献
    相似文献
    引证文献
引用本文

周盛文,林雅铃,张安强.四臂星形聚乙二醇-苯甲酸雌二醇大分子前药的合成与表征[J].高分子材料科学与工程,2016,32(8):1-4. Shengwen Zhou, Yaling Lin, Anqiang Zhang. Synthesis and Characterization of Four-Arm Star-Shaped Poly(ethylene glycol)-Esrtdaiol Benzoate Pro-Drug[J]. Polymer Materials Science & Engineering,2016,32(8):1-4.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2016-08-17
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司