酸改性对大豆基胶粘剂流变性能的影响
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(31470589,31500477);福建省财政专项资金资助项目(K81600001);福建农林大学重点建设项目专项(6112C0700001)


Rheological Properties of Acid-Induced Soy-Based Adhesives
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    研究酸改性对大豆基胶粘剂流变性能的影响。拟合了不同HCl添加量下剪切应力(τ)与剪切速率(γ)的关系曲线,并利用仪器分析其流变性能影响机理。结果表明,HCl改性后胶液黏度最大。HCl添加量为2~4g时,剪切应力与剪切速率呈负相关关系;添加量为6~10g时,呈正相关关系,HCl改性后大豆基胶粘剂为假塑性流体。随着HCl添加量增加,反应时间延长,胶液黏度先减小后逐渐增大;反应温度上升,黏度逐渐提高。经过HCl处理后的胶液粘弹性增强;粒径大小分布明显变窄,体积平均粒径变小。差示扫描量热分析、微观形貌分析表明经过HCl处理后,蛋白分子展开。

    Abstract:

    To determine effects of acid treatments on the rheological properties of soy-based adhesives, the correlation between shear stress (τ) and shear rate (γ) of soy-based adhesives was investigated. Results show that shear stress is negatively correlated with shear rate when the additive amount of HCl is at the range of 2~4 g, whereas a positive correlation is found when the additive amount of HCl is at the range from 6 g to 10 g. The acid-induced soy-based adhesive is a shear-thinning non-Newtonian liquid. The viscosity of soy-based adhesive decreases first and then increases with the increase of additive amount of HCl and reaction time, and decreases as the temperature increases. The acid-modified soy-based adhesive also has a significant increase in parameters of G′ and G″. The Mastersizer, DSC, and ESEM characterizations show the reduction of particle size and destroyed cross-linked structure of soy protein in soy-based adhesive after acid treatment.

    参考文献
    相似文献
    引证文献
引用本文

郑培涛,陈奶荣,毕斌斌,林巧佳.酸改性对大豆基胶粘剂流变性能的影响[J].高分子材料科学与工程,2016,32(8):54-58. Peitao Zheng, Nairong Chen, Binbin Bi, Qiaojia Lin. Rheological Properties of Acid-Induced Soy-Based Adhesives[J]. Polymer Materials Science & Engineering,2016,32(8):54-58.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2016-08-17
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司