层层叠加制备三维静电纺纳米纤维结构
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(21403165,21501140);陕西省自然科学基金资助项目(2015JQ2047,2016JQ2002);陕西省教育厅项目(14JK1468,15JK1453,14Jk1476);博士后基金(2015T81043)


Fabrication of 3D Electrospun Nanofiber Structures Through Stacking Multi-Layers Fiber Membrane
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以通孔金属片为静电纺丝的负极制备了通孔阵列纳米纤维薄膜,将多层纳米纤维薄膜在溶剂中叠加构建了三维纳米纤维结构。扫描电子显微镜结果表明,对于聚苯乙烯、聚乙烯吡咯烷酮和聚己内酯3种不同的高分子材料,均可形成带有规则有序通孔结构的纳米纤维薄膜,孔的大小可以通过模板的选择进行调节。在水中将聚苯乙烯纤维薄膜层层叠加形成了三维纳米纤维结构。在叠加四层聚苯乙烯纤维薄膜的三维结构上培养NIH3T3细胞,细胞可以在三维空间内生长,三维纤维结构表现出良好的生物相容性。

    Abstract:

    Nanofiber mats with through-hole patterns were prepared by electrospinning technique, in which a metal plate with hole arrays was used as negative collector. Afterwards, 3D nanofiber structures were fabricated by stacking different layers nanofiber mats in solvent. Scanning electron microscopy measurement states that nanofiber membrane with regular holes is formed for different polymers, such as polystyrene (PS), polyvinyl pyrrolidone (PVP) and polycaprolactone (PCL). The size of the hole in the nanofiber film can be controlled by the original design of the negative collector. Obvious 3D structure was constructed after stacking four nanofibrous layers polystyrene fiber mats together in water. The PS 3D nanofiber structures show high biocompatibility for the NIH3T3 cell culture, which is able to grow towards different directions.

    参考文献
    相似文献
    引证文献
引用本文

刘俊,常梦洁,张玉涛.层层叠加制备三维静电纺纳米纤维结构[J].高分子材料科学与工程,2016,32(8):144-148. Jun Liu, Mengjie Chang, Yutao Zhang. Fabrication of 3D Electrospun Nanofiber Structures Through Stacking Multi-Layers Fiber Membrane[J]. Polymer Materials Science & Engineering,2016,32(8):144-148.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2016-08-17
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司