木塑复合材料界面改性方法研究进展
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

江苏省高校优势学科建设工程项目(PAPD)


Advances in Interfacial Modification Methods of Wood Plastic Composites
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    自1983年美国生产了第1批木塑复合材料(WPCs)以来,作为一种最具潜力的复合材料,木塑复合材料在建筑和结构应用方面都引起了人们极大的兴趣,其应用不仅可以减小环境污染,而且还可以缓解石油危机。热塑性树脂和植物纤维之间相容性的差异直接影响了木塑复合材料综合性能的提高。文中概述了木塑复合材料界面处理方法的最新研究进展,并对其超/亚临界流体处理方法的优缺点进行了分析和探讨。

    Abstract:

    Wood plastic composites (WPCs) were first produced in the United States in 1983. In recent years, there was an increasing interest in seeking one of the most promising composite materials in building and construction sectors to alleviate environmental pollution and petrochemical crisis. There is a high probability of obtaining poor adhesion between thermoplastic resin and plant fiber, which results in the reduction of comprehensive performances of WPCs because stress cannot be transferred properly from the matrix to the fibers. This paper represented a review on improvement of the interfacial adhesion of WPCs. And the advantages and disadvantages of the super/subcritical fluid technology processing method were analyzed.

    参考文献
    相似文献
    引证文献
引用本文

曹金星,张玲,张云灿.木塑复合材料界面改性方法研究进展[J].高分子材料科学与工程,2016,32(8):171-176. Jinxing Cao, Ling Zhang, Yuncan Zhang. Advances in Interfacial Modification Methods of Wood Plastic Composites[J]. Polymer Materials Science & Engineering,2016,32(8):171-176.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2016-08-17
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司