赖氨酸改性聚乳酸/聚乙二醇共聚物的制备及表征
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(51173041)


Preparation and Characterization of L-Lysine Modified PLLA-PEG Copolymers
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    在丙交酯与聚乙二醇开环共聚的基础上进行了二次聚合,利用具有生物相容性的赖氨酸对聚乳酸/聚乙二醇低聚物进行改性,制备出了赖氨酸改性聚乳酸/聚乙二醇共聚物。通过红外光谱、核磁共振谱、X射线衍射分析仪、差示扫描量热仪、凝胶渗透色谱和接触角测量仪分析比较了聚乳酸、聚乳酸/聚乙二醇和赖氨酸改性聚乳酸/聚乙二醇3种聚合物之间存在的差异。结果表明,实验成功合成了赖氨酸改性聚乳酸/聚乙二醇共聚物;赖氨酸(L-lys)的引入使得共聚物的热焓(ΔH)和熔点(Tm)分别由纯PLLA的81.57 J/g和177.34 ℃降到46.02 J/g和151.34 ℃,有效地改善了分子链的柔性和结晶度;聚合物的数均相对分子质量(Mn)也由纯PLLA的7.7×104降到了3.2×104,且相对分子质量分布变宽,但亲水性却得到大幅提高,有望适用于组织工程领域。

    Abstract:

    Based on ring opening copolymerization of L-lactide (L-LA) and polyethylene glycol 400 (PEG-400), secondary polymerization was carried out using L-lysine with biocompatibility to prepare L-lysine modified poly(lactic acid)/poly(ethylene glycol) copolymers. Obvious differences of PLLA, PLLA-PEG copolymer and L-lysine modified PLLA-PEG copolymer were characterized by FT-IR, NMR, XRD, DSC, GPC and contact angle measurement analysis (CA). The experimental results show that ΔH and Tm of L-lysine modified PLLA-PEG copolymer synthesized fall from 81.57 J/g and 177.34 ℃ of pure PLLA to 46.02 J/g and 151.34 ℃ respectively, which effectively improve the chain flexibility and crystallinity. In addition, number-average molecular weight (Mn) of the copolymer decreases gradually from by 7.7×104 of pure PLLA to 3.2×104, and its dispersivity (Mw/Mn) becomes wider, but the increase of CA makes the hydrophilic higher, which could expect to be applied in the field of tissue engineering.

    参考文献
    相似文献
    引证文献
引用本文

王雪红, 陈智, 魏杰, 陈建定, 唐颂超.赖氨酸改性聚乳酸/聚乙二醇共聚物的制备及表征[J].高分子材料科学与工程,2016,32(9):1-6. Xuehong Wang, Zhi Chen, Jie Wei, Jianding Chen, Songchao Tang. Preparation and Characterization of L-Lysine Modified PLLA-PEG Copolymers[J]. Polymer Materials Science & Engineering,2016,32(9):1-6.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2016-09-17
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司