Abstract:Polyimide(PI) films with adsorbed FeCl3 were suspended in EDOT solutions with different solvents and conducting poly(3,4-ethylenedioxythiophene) (PEDOT) coatings on PI films were synthesized in situ. The solubility of the solvents to EDOT and FeCl3 was checked by spectrophotometer and the solvating extents were examined by UV-vis-NIR spectroscope. The molecular structures of synthesized PEDOT were analyzed by ATR-FT-IR and the doping degrees were determined by XPS spectroscope. The sheet resistances of the PEDOT coatings were measured by four-point probe meter and the interface bonding was evaluated by tape detaching testing. The effects of solvents on the conjugative length and doping degree of synthesized PEDOT as well as electrical conductivity were investigated. From n-heptane, cyclohexane, toluene to chloroform, their solubility and solvating extent increase. The conjugative length and doping degree of PEDOT synthesized in their EDOT solutions increase in the same order. The electrical conductivity of PEDOT coatings synthesized in n-heptane, cyclohexane, toluene and chloroform solutions is 33.7 S/cm, 43.8 S/cm, 163.2 S/cm and 77.2 S/cm,respectively and the interface bonding alters from 0 grade to 5B grade. The conjugative length, doping degree, conductivity and interface bonding of PEDOT synthesized by liquid phased depositional polymerization increase with the solubility and solvating of the solvents adopted and solvation has more promising contribution to the increments.