PolyHIPE块体中甲基丙烯酸甲酯的ATRP溶液聚合
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(51263004)


Solution Polymerization of Methyl Methacrylate in Polymerized High Internal Phase Emulsions by ATRP
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    将用高内相比乳液(HIPE)聚合法得到的多孔聚合物块体(polyHIPE)作为聚合的反应器,在其内部进行甲基丙烯酸甲酯(MMA)的原子转移自由基聚合反应(ATRP),通过扫描电镜、凝胶渗透色谱、红外光谱、热重分析、核磁共振和差示扫描量热等测试手段对块体内聚合的PMMA进行了分析测试。研究表明,MMA在polyHIPE块体内部按照ATRP聚合机理发生聚合;polyHIPE块体对MMA的ATRP溶液聚合影响不同于受限空间内部进行的传统自由基聚合及反向原子转移自由基聚合(RATRP);相较于普通的ATRP溶液聚合,块体内部ATRP聚合所得PMMA的数均相对分子质量有所降低,相对分子质量分布变窄,热稳定性有所提高,间同立构比例有所下降,但全同立构比例明显增加,玻璃化转变温度有所下降。

    Abstract:

    A series of polymerized high internal phase emulsions (polyHIPEs) with different cavities and windows were used as reactors. Methyl methacrylate (MMA) was polymerized in the confined spaces of the polyHIPEs by atom transfer radical polymerization (ATRP). The resulting materials and PMMA in the polyHIPEs were characterized by SEM, GPC, FT-IR, TG, 1H-NMR and DSC. The results indicate that the monomer MMA is successfully polymerized in the polyHIPEs by ATRP. The results are different from conventional radical polymerization and revise ATRP in the confined space. Compared with normal ATRP solution polymerization, the PMMA inside the polyHIPEs possesses a slight lower molecular weight and a narrower molecular weight distribution than those of the polymerization in the absence of polyHIPEs. The initial decomposition temperature of the PMMA increases significantly, while the glass transition temperature decreases, in addition, the proportion of syndiotactic PMMA decreases but isotactic PMMA increases.

    参考文献
    相似文献
    引证文献
引用本文

陈明森, 孙发孟, 周泓望, 龚桂胜, 张发爱. PolyHIPE块体中甲基丙烯酸甲酯的ATRP溶液聚合[J].高分子材料科学与工程,2016,32(9):32-37. Mingsen Chen, Fameng Sun, Hongwang Zhou, Guisheng Gong, Fa’ai Zhang. Solution Polymerization of Methyl Methacrylate in Polymerized High Internal Phase Emulsions by ATRP[J]. Polymer Materials Science & Engineering,2016,32(9):32-37.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2016-09-17
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司