2,3,3’,4’-联苯四酸二酐硬质聚酰亚胺泡沫材料的结构与性能
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

863计划项目(2015AA033902)


Properties of 2,3,3’,4’-Biphenyltetracarboxylic Dianhydride Added Rigid Polyimide Foam
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    系统研究了在含2,3,3’,4’-联苯四酸二酐(a-BPDA)的聚酰亚胺(PI)泡沫材料体系中,计算相对分子质量、二胺分子结构、二酐分子结构对聚酰亚胺泡沫材料性能的影响。研究发现,对于a-BPDA/m-PDA/NA体系,计算相对分子质量为1500时,可以制备得到性能优良的硬质耐高温聚酰亚胺泡沫材料,其玻璃化转变温度高于350 ℃,闭孔率大于88%,压缩强度为1.34 MPa。在该体系中,部分引入ODPA,可提高材料的韧性;当n(BTDA)∶n(a-BPDA)=5∶5时,泡沫材料不但拥有高的耐热性能和力学力学性能,同时还具有良好的韧性。

    Abstract:

    The influences of calculated molecular weight, different diamines and different dianhydrides on properties of 2,3,3’,4’-biphenyltetracarboxylic dianhydride (a-BPDA)-added polyimide foam were studied. The results show that a-BPDA/m-PDA/NA system can provide excellent high-temperature resistant rigid polyimide foam with a calculated molecular weight of 1500 g/mol. The foam has high glass transition temperature (>350 ℃), high closed-cell content (>88%) and high compressive strength (1.34 MPa). Moreover, partly introducing ODPA into the above system can increase foam toughness. When the mole ratio of BTDA to a-BPDA is 5∶5, the foam not only shows good mechanical and thermal performance, but also outstanding toughness.

    参考文献
    相似文献
    引证文献
引用本文

胡爱军, 王磊磊, 李姝姝, 李克迪, 王志媛, 徐时彧, 杨士勇.2,3,3’,4’-联苯四酸二酐硬质聚酰亚胺泡沫材料的结构与性能[J].高分子材料科学与工程,2016,32(9):38-44. Aijun Hu, Leilei Wang, Shushu Li, Kedi Li, Zhiyuan Wang, Shiyu Xu, Shiyong Yang. Properties of 2,3,3’,4’-Biphenyltetracarboxylic Dianhydride Added Rigid Polyimide Foam[J]. Polymer Materials Science & Engineering,2016,32(9):38-44.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2016-09-17
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司