聚丙烯单聚合物复合材料嵌件式注射成型过程的数值模拟
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(51403019)


Numerical Simulation of Insert Injection Molding Process for Polypropylene Single-Polymer Composites
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    单聚合物复合材料(SPC)是基体和增强体来自同种聚合物的复合材料,具有密度小、界面粘接性好和回收成本低等优点。嵌件式注射成型可实现SPC的快速制备。为了检验加工温度窗口的大小,掌握型腔内部温度分布情况,文中使用Moldex3D软件模拟分析了聚丙烯单聚合物复合材料(PP SPC)嵌件式注射成型过程,比较了PP SPC嵌件式注射成型与PP注射成型的模拟结果,讨论了温度、黏度和翘曲变形情况。将不同熔融温度下数值计算得到的温度分布结果与实验样品照片进行了对比分析。研究结果表明,在180 ℃条件下嵌件式注射成型PP SPC,纤维不会熔融而能保持增强效果。

    Abstract:

    Single-polymer-composites (SPCs) are the class of composites with matrix and reinforcement made from the same polymer. Their advantages are reduced weight, superior mechanical properties and improving recyclability. Insert injection molding could realize the rapid production of SPCs. In order to determine the processing temperature window and obtain the temperature distribution inside the mold cavity, the insert injection molding process of PP SPCs was numerical simulated by the software Moldex3D. The simulated results of insert injection molding of PP SPCs and the injection molding of pure PP were comparatively analyzed. The distribution of temperature, viscosity, and warpage were all discussed. The temperature distribution under different injection temperature and experimental samples produced at the relative injection temperatures were comparatively analyzed. The results show that the fibers would not be melted and then could realize the function of reinforcement at the injection temperature of 180 ℃.

    参考文献
    相似文献
    引证文献
引用本文

王建, 姜南南, 彭炯.聚丙烯单聚合物复合材料嵌件式注射成型过程的数值模拟[J].高分子材料科学与工程,2016,32(9):108-112. Jian Wang, Nannan Jiang, Jiong Peng. Numerical Simulation of Insert Injection Molding Process for Polypropylene Single-Polymer Composites[J]. Polymer Materials Science & Engineering,2016,32(9):108-112.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2016-09-17
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司