聚己二酸/对苯二甲酸丁二酯发泡材料的制备及性能
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家科技支撑计划项目(2012BAD38B00,2012BAD38B01)


Preparation and Properties of Poly(butyleneadipate-co-terephthalate) Foaming Material
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    通过熔融挤出法制备一种生物可降解缓冲包装材料聚己二酸/对苯二甲酸丁二酯,并测试其表观密度、热学性能、红外光谱及缓冲性能。利用正交实验的极差分析筛选出发泡最佳工艺,通过差示扫描量热分析仪、傅里叶变换红外光谱、质构仪分别测试缓冲包装材料的热学性能和缓冲性能。结果显示, 最佳发泡工艺为发泡剂碳酸氢钠添加量为20%,发泡温度为140 ℃,发泡时间为25 min,其表观密度为0.18 g/cm3;NaHCO3在发泡材料中无残留;30 mm厚的缓冲材料缓冲效果最佳。

    Abstract:

    To prepare a biodegradable cushioning packaging material poly (butyleneadipate-co-terephthalate) by melt extrusion, and its apparent density, thermal and cushioning properties were investigated. Methods range analysis of orthogonal experiment was used to optimize foaming process. Thermal and cushioning performance were studied by DSC, Fourier transform infrared spectroscopy and texture analyzer. Results show that the optimum foaming process was obtained as follow: the foaming agent 20%, the foaming temperature 140 ℃ and foaming time 25 min. Under these conditions, the apparent density is 0.18 g/cm3; no residue of NaHCO3 is detected in the foamed material; materials with the thickness of 30mm perform the best cushioning effect.

    参考文献
    相似文献
    引证文献
引用本文

刘林林, 宋树鑫, 梁敏, 张玉琴, 齐小晶, 董同力嘎.聚己二酸/对苯二甲酸丁二酯发泡材料的制备及性能[J].高分子材料科学与工程,2016,32(9):125-130. Linlin Liu, Shuxin Song, Ming Liang, Yuqing Zhang, Xiaojing Qi, Tungalag. Preparation and Properties of Poly(butyleneadipate-co-terephthalate) Foaming Material[J]. Polymer Materials Science & Engineering,2016,32(9):125-130.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2016-09-17
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司