Abstract:A new fluorene-based diamine with tert-butyl groups, 9,9-bis(3-tert-butyl-4-(4 -amino-phenoxy)phenyl)fluorene(2), was produced by two-steps with 9,9-bis(3-tert-butyl-4-(4 -hydroxy)fluorene and p-chloronitrobenzene as starting materials. This diamine monomer leads to a series of soluble polyimides (PI 3a~3c) when reacted with three commercial aromatic dianhydrides. The inherent viscosities of these polyimides are in range of 0.69~0.81 dL/g. These polyimides can dissolve in some tested solvents at room temperature and have good films formation. The films prepared from their solution display good mechanical properties, and their tensile strength, elongation at break and elastic modulus are in the range of 74.7~85.4 MPa, 6.6%~10.3%, 1.8~2.7 GPa, respectively. These polyimides also show good thermal properties. Their glass-transition temperature is higher than 285 ℃, and the 10% mass loss temperature in air and nitrogen is higher than 430 ℃ and 500 ℃, respectively.