Abstract:Macroinitiator poly(CMS-co-GMA) was prepared through radical polymerization, employing azobisisobutyronitrile as initiator, 4-chloride-α-methyl styrene and glycidyl methacrylate as monomers, at 65 ℃. Raising the temperature to 90 ℃, block copolymer PGMA-b-PHEMA was prepared through poly(CMS-co-GMA) reinitiate hydroxyethyl methacrylate, then the copolymers were introduced into the surface of lithium battery separator to improve thermostability and hydrophilcity by hydrogen bond self-assembly. The influences of self-assembled conditions on the performance of membranes were studied. FT-IR, 1H-NMR, GPC were applied to characterize the structure of copolymers. AFM was applied to characterize the morphology of membrane. The permeability, thermal shrinkage, water contact angle were applied to characterize the performance of membrane. The results indicate that the thermal shrinkage of the modified membrane can be reduced to 2%, The water contact angle can be reduced to 33°.