阳离子染料可染尼龙6制备及性能
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Preparation and Properties of Cationic Dyeable Polycaprolactam
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以己内酰胺(CPL)为原料,在聚己内酰胺(PA6)的缩聚阶段加入间苯二甲酸-5-磺酸钠(5-SSIPA)和聚乙二醇2000(PEG2000),制备了阳离子染料可染PA6(ECD-PA6)。通过染色实验、差示量热扫描、热失重分析、X射线衍射分析、流变测试等探讨了5-SSIPA和PEG的加入对阳离子染料可染PA6染色性能、结晶性能、热力学性能和流变性能等的影响。结果表明,随着5-SSIPA加入,聚合物染色性提高,聚合物相应的熔融和结晶的温度范围变宽,同时分解温度降低,热稳定性良好,且聚合物熔体黏度上升,损耗模量(G″)增加;PEG 的加入使得CD-PA6聚合物晶型改变,染色性进一步提高,且能有效加强聚合物分子链的流动性,降低聚合物熔体黏度,熔体弹性响应更明显。

    Abstract:

    The easy cationic dyeable polyamide (ECD-PA6) was prepared with sodium salt of 5-sulfoisophthalic acid (5-SSIAP) and polyethylene glycol (PEG) added through polycondensation process. Through wide angle X-ray diffraction (WAXD), Fourier transform infrared spectroscopy (FT-IR), differential scanning calorimetry (DSC) and thermogravimetric analysis (TG), the influence of 5-SSIPA and PEG on copolyamide dyeable ability, thermodynamic properties and rheological properties were investigated. With the incorporation of 5-SSIPA, the dyeable properties improve, the melting point and thermal decomposition temperature of copolymers both drop, corresponding the temperature range of melting and crystallization becomes wider, as well as the viscosity of copolyamide and the loss modulus(G″) increase. What′s more, PEG can further improve dyeablity and transform crystal forms of ECD-PA, and fairly promote the rheology of molecule chain. Meanwhile, the elastic response of melt is more remarkable.

    参考文献
    相似文献
    引证文献
引用本文

熊力堃, 丁尔民, 封其都, 谭延坤, 刘冬青, 尹翠玉.阳离子染料可染尼龙6制备及性能[J].高分子材料科学与工程,2016,32(10):23-29. Likun Xiong, Erming Ding, Qidou Feng, Yankun Tan, Dongqing Liu, Cuiyu Yin. Preparation and Properties of Cationic Dyeable Polycaprolactam[J]. Polymer Materials Science & Engineering,2016,32(10):23-29.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2016-10-14
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司