成核剂TMC-210对聚乳酸结晶及性能的影响
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(21264012)


Influence of Nucleator TMC-210 on Crystallization and Properties of PLLA
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    针对聚乳酸结晶速率慢和冲击强度低的问题,考察了熔融共混添加成核剂TMC-210对PLLA结晶、熔融行为和力学性能的影响。研究发现,纯L-聚乳酸(PLLA)在10℃/min降温过程中不结晶,当TMC-210质量分数为0.2%时,PLLA就能显著结晶,并且随着TMC-210含量的增加,结晶峰移向高温。从等温结晶结果看,TMC-210的添加使得PLLA结晶时间缩短,结晶速率加快。另外,PLLA的成核密度增加且球晶尺寸减小,同时,TMC-210质量分数为0.2%时,PLLA的冲击强度提高了3.3倍。因此,添加TMC-210是一种能够促进PLLA结晶和增韧的有效成核剂。

    Abstract:

    In order to solve the problem of slow crystallization rate and low impact strength, the nucleating agent TMC-210 was introduced into poly(L-lactic acid)(PLLA) via melt blend. The effects of TMC-210 on crystallization, melting behavior, and mechanical properties of PLLA were investigated. It is found that pure PLLA has no crystallization peak upon cooling at 10 ℃/min. However, with loading 0.2% TMC-210, PLLA can complete crystallization, and the crystallization peak shifts to higher temperature with increasing the TMC-210 content. Isothermal crystallization analysis reveals that the addition of TMC-210 leads to shorter crystallization time and faster crystallization rate of PLLA. Besides, the nucleation density of PLLA increases and the spherulite size decreases. When the TMC-210 mass fraction is 0.2%, the impact strength of PLLA is enhanced by 3.3 times. Therefore, adding nucleating agent TMC-210 is an effective approach to promote the crystallization rate and impact strength of PLLA.

    参考文献
    相似文献
    引证文献
引用本文

丁生芳,罗发亮,王克智,邢倩,司朋飞,雷小梅,沈志远.成核剂TMC-210对聚乳酸结晶及性能的影响[J].高分子材料科学与工程,2016,32(10):66-72. Shengfang Ding, Faliang Luo, Kezhi Wang, Qian Xing, Pengfei Si, Xiaomei Lei, Zhiyuan Shen. Influence of Nucleator TMC-210 on Crystallization and Properties of PLLA[J]. Polymer Materials Science & Engineering,2016,32(10):66-72.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2016-10-14
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司