磷钼酸铵在半硬质聚氯乙烯中阻燃-抑烟的应用
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Application of Ammonium Phosphomolybdate as Flame Retardant and Smoke Suppression in SemiRigid Polyvinyl Chloride
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用化学沉淀法制备磷钼酸铵(APM),并使用红外光谱与X射线衍射仪对其进行检测,结果表明,获得了磷钼酸铵,且其中含有结晶水与少量(NH4)3PO4(MoO3)12·4H2O。将制备的磷钼酸铵与三氧化钼(MoO3)、八钼酸铵(AOM)对半硬质聚氯乙烯(PVC)的抑烟性能、阻燃性能及热稳定性能进行对比,并分别通过烟密度、锥形量热及热失重分析表征,结果表明,PVC/APM 的抑烟性能、阻燃性能及热稳定性能比PVC空白样、PVC/MoO3 及PVC/AOM 更优异,使半硬质PVC的最大烟密度(MSD)与烟密度等级(SDR)分别降低至78.47与61.82;总释放热(THR)降低21.98%;添加5phrAPM 后,半硬质PVC在700℃时的残炭量提升21.61%。

    Abstract:

    Ammonium phosphomolybdate (APM) was synthesized via chemical precipitation method. The results of IR and XRD show that the production is APM, and containing water of crystallization and a small amount of (NH4)3PO4(MoO3)12·4H2O. The smoke suppression, flame retardancy and thermal stability of semi-rigid PVC treated with APM, molybdenum trioxide (MoO3), ammonium octamolybdate (AOM) were comparative studied by smoke density instrument cone calorimeter and thermogravimetic analysis (TGA), respectively. The test results indicate that the smoke suppression, flame retardancy and thermal stability properties of the PVC/APM composites are higher than those of pure PVC, PVC/MoO3 and PVC/AOM composites. The most great smoky density (MSD) and smoke density rating (SDR) are decreased to 78.47 and 61.82, respectively. Total heat release (THR) is decreased by 21.98%. By adding 5 phr APMs, the charring residue at 700 ℃ for semi-rigid PVC is increased by 21.61%.

    参考文献
    相似文献
    引证文献
引用本文

覃虎川,陈绪煌.磷钼酸铵在半硬质聚氯乙烯中阻燃-抑烟的应用[J].高分子材料科学与工程,2016,32(10):100-104. Huchuan Qin, Xuhuang Chen. Application of Ammonium Phosphomolybdate as Flame Retardant and Smoke Suppression in SemiRigid Polyvinyl Chloride[J]. Polymer Materials Science & Engineering,2016,32(10):100-104.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2016-10-14
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司