氟化聚乙烯醇/SiO2 超疏水薄膜的制备及性能
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

山西省基础研究计划项目(2013021012-1);国家自然科学基金资助项目(21304065);太原理工大学校优秀青年培养项目(2012L060);山西省青年基金(2012021012-1)


Fabrication and Properties of Fluorinated Polyvinyl Alcohol/SiO2 Super-Hydrophobic Film
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以亲水性高分子聚乙烯醇(PVA)为基体,二氧化硅(SiO2)纳米颗粒为无机填料,旋涂在玻璃表面后的PVA/SiO2再经十七氟癸基三甲氧基硅烷(C13H13F17O3Si,FAS)修饰,制备了具有超疏水性能的PVA/SiO2FAS薄膜。考察了PVA与SiO2复合的比例及FAS修饰对膜疏水性的影响。用傅里叶变换红外光谱、X射线能谱和扫描电子显微镜分别对超疏水表面进行了结构分析和形貌表征,用接触角测量仪观察了水滴在膜表面的润湿性。结果显示,当PVA/SiO2体积比为1∶5时,氟化PVA/SiO2膜表面具有较好的超疏水功能,静态接触角可达151.24°,滚动角约为4°。这主要是膜表面含有低表面能氟原子及具有纳米粗糙结构共同作用的结果。

    Abstract:

    The super-hydrophobic surface was fabricated based on hydrophilic polymer polyvinyl alcohol(PVA) by pin-coating method. PVA was used as polymer matrix, and SiO2 nanoparticles were used as filler. The spin-coated PVA/SiO2 thin film was modified with fluoroalkylsilane (FAS) to obtain the super-hydrophobic surface. The effect of composition between PVA and SiO2 and the modification of FAS on the surface wetting was studied. Fourier transform infrared spectrometer, scanning electron microscopy, X-ray photoelectron spectroscopy were used to study its elemental composition and the surface morphology. Contact angle(CA) was applied to study the wetting property. The results show that when the volume ratio of PVA/SiO2 is 1∶5 or 1∶6, the FAS modified PVA/SiO2 has obvious super-hydrophobic property, CA is over 150°. The good super-hydrophobicity FAS modified PVA/SiO2 is mainly attributed to the presence of low surface energy element F and the nanostructure.

    参考文献
    相似文献
    引证文献
引用本文

杜海燕,宋震,郝晓刚,梁镇海,王永洪,申迎华.氟化聚乙烯醇/SiO2 超疏水薄膜的制备及性能[J].高分子材料科学与工程,2016,32(10):138-142. Haiyan Du, Zhen Song, Xiaogang Hao, Zhenhai Liang, Yonghong Wang, Yinghua Shen. Fabrication and Properties of Fluorinated Polyvinyl Alcohol/SiO2 Super-Hydrophobic Film[J]. Polymer Materials Science & Engineering,2016,32(10):138-142.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2016-10-14
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司