木质素改性水性聚氨酯胶膜的制备与性能
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

陕西省科研创新团队资助项目(2013KCT-08);陕西省教育厅项目(14JK1090);陕西科技大学新团队资助项目(TD12-04)


Preparation and Properties of Lignin Modified Waterborne Polyurethane Film
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以异佛尔酮二异氰酸酯(IPDI)和聚四氢呋喃醚二醇(PTMG)为主要原料,碱木质素(LG)为改性剂,二羟甲基丙酸(DMPA)为亲水扩链剂,合成了一系列木质素改性水性聚氨酯(LWPU)。研究了LG 用量、n(NCO)/n(OH)及DMPA用量对LWPU 胶膜力学性能和耐水性能的影响。结果表明,当LG质量分数为0.75%,n(NCO)/n(OH)为5∶1,DMPA质量分数为6%时,胶膜的综合性能较好,其吸水率仅为3.24%,耐水性能明显提高。通过红外光谱、热重分析、X射线衍射及原子力显微镜和扫描电镜对LWPU 胶膜的结构与性能等进行了表征,热重分析结果表明,LG的加入可提高聚氨酯材料的热稳定性。加入适量的木质素可以改善水性聚氨酯的耐水性及热稳定性。

    Abstract:

    A series of lignin modified waterborne polyurethanes (LWPU) were prepared by prepolymer method with isophorone diisocyanate (IPDI) and polytetramethylene ether glycol (PTMG) as raw materials, alkali lignin (LG) as modifier and dimethylol propionic acid (DMPA) as hydrophilic chain extender. The effects of the dosage of LG, n(-NCO)∶n(-OH) and the dosage of DMPA on properties of LWPU films were systematically studied. The results show that when the LG dosage is 0.75%, n(NCO)/n(OH) is 5∶1 and DMPA dosage is 6%, the comprehensive performance of LWPU is better, the water absorption only is 3.24%, the water resistance is obviously improved. The FT-IR, TG, XRD, AFM and SEM were used to characterize the structure and properties of LWPU. TGA analysis indicates that the thermal stability of LWPU is improved by using LG as modifier. Adding a balanced amount of lignin can significantly improve the water resistance and thermal stability of polyurethane films.

    参考文献
    相似文献
    引证文献
引用本文

任龙芳, 贺齐齐, 强涛涛, 王学川.木质素改性水性聚氨酯胶膜的制备与性能[J].高分子材料科学与工程,2016,32(10):143-148. Longfang Ren, Qiqi He, Taotao Qiang, Xuechuan Wang. Preparation and Properties of Lignin Modified Waterborne Polyurethane Film[J]. Polymer Materials Science & Engineering,2016,32(10):143-148.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2016-10-14
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司