聚碳酸酯基聚氨酯/芳纶纤维复合材料的制备与性能
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(21676150);青岛市科技计划基础研究项目(13-1-4-147-jch)


Preparation and Properties of Polycarbonate Urethane/Aramid Pulp Composites
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以聚碳酸酯二元醇为软段,利用预聚体法制备了系列聚碳酸酯基聚氨酯/芳纶浆粕纤维(Aramidpulp)复合材料,研究了芳纶浆粕纤维对聚碳酸酯基聚氨酯弹性体(PUE)力学性能的影响。采用扫描电镜、X射线衍射、差示扫描量热分析、热重分析、红外光谱及电子拉伸机等测试仪器对聚氨酯复合材料的结构与性能进行了表征和分析。结果表明,芳纶浆粕纤维能有效实现对聚氨酯弹性体的增强作用,其中对撕裂强度的增强尤为突出。当芳纶浆粕纤维用量为0.5%时,复合材料的撕裂强度由106kN/m 提高到120kN/m,表现出最好的力学性能;芳纶浆粕纤维在聚氨酯中分散均匀,提高了复合材料的热稳定性。

    Abstract:

    A series of aramid pulp/polyurethane composites based on polycarbonate polyol as soft segment were prepared by prepolymerization process. The effect of aramid pulp content on the mechanical properties of aramid pulp/polyurethane composites was investigated. The structure and properties of PUE were analyzed by DSC, TG, XRD, FT-IR and strain-stress instrument. The results show that aramid pulp can effectively strengthen and toughen the mechanical properties of polyurethane elastomers, especially the tear strength. When the content of aramid pulp is about 0.5%, the tear strength of composites increases from 106 kN/m to 120 kN/m, and its comprehensive mechanical properties are the best. The proper content of aramid pulp could be dispersed well in the PU matrix, and the thermal stability of PUE is improved to some extent.

    参考文献
    相似文献
    引证文献
引用本文

王晓环,蒋玉湘,徐文龙,罗明艳,李翠苹,胡晓云,李再峰.聚碳酸酯基聚氨酯/芳纶纤维复合材料的制备与性能[J].高分子材料科学与工程,2016,32(10):160-163. Xiaohuan Wang, Yuxiang Jiang, Wenlong Xu, Mingyan Luo, Cuiping Li, Xiaoyun Hu, Zaifeng Li. Preparation and Properties of Polycarbonate Urethane/Aramid Pulp Composites[J]. Polymer Materials Science & Engineering,2016,32(10):160-163.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2016-10-14
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司