二硫化钼与二硫化钨填充改性聚四氟乙烯的摩擦学性能
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(51575467,51175445);科技部国际合作专项(2012DFG70640)


Tribological Behaviour of Polytetrafluoroethylene Composites Modified with Molybdenum Disulfide and Tungsten Disulfide
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用粉末冶金的方法制备了二硫化钼(MoS2)、二硫化钨(WS2)单独和复合填充改性聚四氟乙烯(PTFE)复合材料,对比分析了改性后复合材料的摩擦学性能;采用扫描电镜观察复合材料的磨损表面形貌,超景深显微镜观察对偶钢球上转移膜的表面形态,并分析了其磨损机理。结果表明,MoS2和WS2均能改善复合材料的摩擦稳定性和耐磨性,MoS2和WS2分别在质量分数10%、25%时改善效果达到最优,且低于20%时MoS2改性效果优于WS2,高于20%则相反;复合填充时耐磨性改善效果最优。添加不同种类的固体润滑剂,PTFE复合材料表现出不同的磨损表面形态,呈现不同的磨损机理。

    Abstract:

    Polytetrafluoroethylene (PTFE) composites with molybdenum disulfide (MoS2) and/or tungsten disulfide (WS2) as fillers were prepared by powder metallurgy method and the tribological properties of these composites were investigated, morphologies of worn surface and transfer film on counterpart balls were observed by SEM and ultra-depth field optical microscopy respectively, in addition, the wear mechanisms were studied. The results show that the friction stability and wear resistance are improved by addition of MoS2 and WS2, the optimum mass fraction is 25% for WS2 and 10% for MoS2; meanwile, MoS2-filled PTFE composites display better tribology properties than WS2 when the mass fraction is less than 20%, opposite more than it. Besides, hybrid MoS2 and WS2 fillers exhibit optimal abrasive?resistance performance. The wear mechanisms and wear surface morphologies of PTFE composites vary with adding different kinds of solid lubrication.

    参考文献
    相似文献
    引证文献
引用本文

林启权, 毛波, 董文正, 阳菲.二硫化钼与二硫化钨填充改性聚四氟乙烯的摩擦学性能[J].高分子材料科学与工程,2016,32(11):51-57. Qiquan Lin, Bo Mao, Wenzheng Dong, Fei Yang. Tribological Behaviour of Polytetrafluoroethylene Composites Modified with Molybdenum Disulfide and Tungsten Disulfide[J]. Polymer Materials Science & Engineering,2016,32(11):51-57.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2016-11-25
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司