均聚聚丙烯在干热环境中耐候性能及结构表征
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(21474082,21364014)


Weathering Performance and Structure Characterization of Homopolymer PP in Dry Environment
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以吐鲁番户外暴晒场为聚丙烯(PP)及耐候性PP的自然老化试验点,连续暴晒12个月。在室外暴晒过程中,研究了材料的断裂伸长率和冲击强度、表面微观形态和元素组成、相对分子质量及其分布的变化,分析了防老化助剂对聚丙烯耐老化性能的影响。结果表明,试样PP-0暴晒90 d后断裂伸长率和冲击强度保持率分别降至6.4%和5.6%,氧元素增加了23.21%,重均相对分子质量从24.2万降至8.07万,表面出现大量宽度为3.05 μm的裂纹。而耐候改性的PP-3试样中防老化助剂能够起到协同后补作用,抑制热氧光对PP的降解老化速度,从而提高聚丙烯的使用寿命。

    Abstract:

    Turpan was chosen as outdoor exposure field for natural ageing test of PP and weather-resistance PP, continuous exposure for 12 months. The elongation at break and impact strength,surface microscopic morphology and elemental composition, molecular weight and molecular weight distribution of samples were studied in process of outdoor exposure. The results show that elongation at break and impact strength retention rate of sample PP-0 after 90 d exposure fall to 6.4% and 5.6%, respectively, an increase of 23.21% for oxygen content, the average molecular weight of sample is reduced from 242000 to 80700, a large number of surface cracks with the width of 3.05 μm. While the anti-aging aids of weathering modified PP-3 samples can play a synergistic effect, inhibiting degradation rate of PP, thereby increasing life of polypropylene.

    参考文献
    相似文献
    引证文献
引用本文

买买提江·依米提, 艾买提江·萨伍提, 郭春云, 倪玲贵.均聚聚丙烯在干热环境中耐候性能及结构表征[J].高分子材料科学与工程,2016,32(11):81-85. Mamatjan Yimit, Amatjan Sawut, Chunyun Guo, Linggui Ni. Weathering Performance and Structure Characterization of Homopolymer PP in Dry Environment[J]. Polymer Materials Science & Engineering,2016,32(11):81-85.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2016-11-25
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司