Abstract:The friction and wear behavior of nitrile-butadiene rubber (NBR) filled with different kinds of zinc oxide (ZnO) were studied through ring-on-block tester under dry sliding. Based on samples preparation, the molecular structure of worn surface was measured by FT-IR. The results show that, compared with NBR containing conventional ZnO (c-ZnO), nano-ZnO (n-ZnO), and modified c-ZnO, NBR containing modified n-ZnO exhibits more outstanding wear resistance. Its wear loss is 0.021 g, which is a quarter of wear loss of NBR containing c-ZnO. The frictional coefficient of NBR containing modified n-ZnO is the lowest (about 0.4). There is no else worn form except for abrasive wear about NBR containing modified n-ZnO. The reason for the variation of friction and wear behavior of NBR containing different kinds of ZnO was discussed. The analysis results indicate that cure reversion induced by the generation of heat by friction is the root cause of the difference about friction and wear behavior. Namely, the decrease of crosslinking density results from breakage of multi sulfur bond and main chain modification caused by frictional heat, which results in reduction of the wear resistance.