乳酸接枝纳米二氧化钛/聚乳酸复合物的制备
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

新世纪优秀人才(NCET-12-0601);北京市教委重点基金(KZ201310012014)


Preparation of Lactic Acid-g-TiO2/Poly(lactic acid) Composites
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    将乳酸低聚物接枝到纳米二氧化钛(TiO2)的表面,获得接枝改性二氧化钛(g-TiO2),采用溶液共混的方法制备出聚左旋乳酸(PLLA)和g-TiO2 复合物。通过扫描电子显微镜、差示扫描量热仪、紫外-可见吸收光谱仪和动态力学分析仪等技术系统研究了g-TiO2 的加入对PLLA结构和性能的影响。结果表明,在辛酸亚锡做催化剂的条件下,乳酸低聚物可接枝到纳米TiO2 的表面,接枝率为6.5%。TiO2 经过表面接枝改性后,在乙醇分散体系中团聚粒子的平均粒径由93nm 降低为58nm。在质量分数低于1.5%时,g-TiO2 在PLLA 中的分散性显著提升,可均匀分散在基体中。g-TiO2的加入可提高PLLA的结晶速率和结晶度,同时可改善PLLA的抗紫外性能和储能模量。

    Abstract:

    Lactic acid grafted TiO2 catalyzed with stannous octoate and poly(lactic acid) (PLLA) composites were prepared by solution casting. The structures and properties of composites were characterized by SEM, DSC, ultraviolet-visible absorption spectrometry and DMA. The results show that lactic acid oligomer are successfully grafted onto the surface of nanometer TiO2 catalyzed with stannous octoate and the grafting ratio is 6.5%. The average size of particles dispersing in ethanol system decreases from 93 nm to 58 nm after modification. In PLLA matrix, comparing with easy aggregation of TiO2, g-TiO2 can be uniformly dispersed with the content less than 1.5%. The crystallization rate and crystallinity of PLLA are markedly improved when the conent of TiO2 is below 1.5%, and simultaneously, its heat stability, ultraviolet resistance and storage modulus increase.

    参考文献
    相似文献
    引证文献
引用本文

张银芳,熊祖江,张秀芹,王锐,梁宁宁,尹会会,李根.乳酸接枝纳米二氧化钛/聚乳酸复合物的制备[J].高分子材料科学与工程,2016,32(11):145-149. Yinfang Zhang, Zujiang Xiong, Xiuqin Zhang, Rui Wang, Ningning Liang, Huihui Yin, Gen Li. Preparation of Lactic Acid-g-TiO2/Poly(lactic acid) Composites[J]. Polymer Materials Science & Engineering,2016,32(11):145-149.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2016-11-25
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司