聚丙烯酸-聚乳酸接枝共聚物涂膜的制备及性能
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

陕西省工业攻关项目(2014K10-03);西北大学教改研究成果培育与推广计划项目(JX13009)资助;西北大学大学生创新创业训练计划


Preparation and Properties of Poly(acrylic acid)-g-Poly(L-lactic acid) Copolymer Coating
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用溶液聚合法合成了生物降解材料聚丙烯酸-聚乳酸接枝共聚物(PAA-g-PLLA),通过红外、核磁和凝胶渗透色谱对其结构进行了表征,测定了涂膜的附着力、黏度和硬度等基本性能。正交实验结果表明最佳的合成工艺条件为:硬软单体的质量比为55∶35,过氧化苯甲酰(BPO)的用量为3%,反应温度为85 ℃,甲基丙烯酸羟乙酯-聚乳酸大单体(HEMA-PLLA)与软硬单体的质量比为1∶2,单体与溶剂的质量比为2∶2。对比聚丙烯酸涂膜和PAA-g-PLLA 涂膜的接触角,以及PLLA降解性能看出,PAA-g-PLLA涂膜具有降低表面能和自抛光的双重特性。

    Abstract:

    The biodegradable poly(acrylic acid)-g-poly(L-lactic acid) copolymer was prepared by solution polymerization. Their composition, structure, and molecular weight were characterized via IR, NMR and GPC techniques, and properties of the copolymer coating, such as adhesion force, viscosity and hardness, were determined. The results of orthogonal design experiments show that the optimal conditions are the mass ratio of hard to soft monomers 55∶35, the dosages of BPO 3%, the reaction temperature 85 ℃, the mass ratio of HEMA-PLLA to monomers 1∶2, the mass ratio of monomers to solvents 2∶2. The data from the contact angle and biodegradable properties show that PAA-g-PLLA coating has the lower-surface energy and self-polishing performance, compared with acrylic coating.

    参考文献
    相似文献
    引证文献
引用本文

王鹏飞,闵江,韦雄雄,郝红,刘明,张青翠.聚丙烯酸-聚乳酸接枝共聚物涂膜的制备及性能[J].高分子材料科学与工程,2016,32(11):150-155. Pengfei Wang, Jiang Min, Xiongxiong Wei, Hong Hao, Ming Liu, Qingcui Zhang. Preparation and Properties of Poly(acrylic acid)-g-Poly(L-lactic acid) Copolymer Coating[J]. Polymer Materials Science & Engineering,2016,32(11):150-155.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2016-11-25
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司