壳聚糖/羟丙基甲基纤维素温敏水凝胶的制备
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

中央高校基本业务费资金资助(XDJK2013B027)


Preparation of Chitosan/Hydroxypropyl Methyl Cellulose Thermo-Sensitive Hydrogel
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用壳聚糖(CS)、羟丙基甲基纤维素(HPMC)为原料制备了温敏性水凝胶,分析了CS含量、HPMC含量、HPMC黏度和甘油添加量对CS/HPMC 的低临界溶解温度的影响。最优条件为CS含量为1%(m/V),HPMC 的黏度为6mPa·s,HPMC的含量为7%(m/V),甘油含量为32%(m/V),得到体系的低临界溶解温度为32 ℃,体系的黏度为1407mPa·s。红外光谱测试表明CS、HPMC与甘油之间没有化学作用,流变性测试显示体系可以在36 ℃下凝胶化。MTT测试结果表明CS/HPMC/Gyl无毒副作用,具有良好的生物相容性。研究结果表明该体系是一种良好的可注射型温敏水凝胶。

    Abstract:

    Temperature-sensitive hydrogels were prepared by blending chitosan(CS) with hydroxypropyl methyl cellulose (HPMC). The effects of chitosan content, HPMC content, HPMC viscosity type and glycerol content on the lower critical solution temperature (LCST) of the formulations were analyzed. The formulation of 1% CS, 7% HPMC (viscosity type 6 mPa·s) and 32% glycerol performs best, and LCST is brought down to 32 ℃ tested by “Visual Tube Inversion Method”, the viscosity of the system is 1407 mPa·s. FT-IR shows no chemical reaction among CS, HPMC and glycerol. Rheological test indicates that LCST is 36 ℃. MTT assay demonstrates that the CS/HPMC/Gyl system is non-toxic and biocompatible. The results show that the formulation is a good injectable thermo-sensitive hydrogel.

    参考文献
    相似文献
    引证文献
引用本文

陈丽嫚,汪涛,李康.壳聚糖/羟丙基甲基纤维素温敏水凝胶的制备[J].高分子材料科学与工程,2016,32(11):156-161. Liman Chen, Tao Wang, Kang Li. Preparation of Chitosan/Hydroxypropyl Methyl Cellulose Thermo-Sensitive Hydrogel[J]. Polymer Materials Science & Engineering,2016,32(11):156-161.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2016-11-25
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司